|
|
Número de pieza | M208-A4 | |
Descripción | Contact Image Sensor Module | |
Fabricantes | CMOS Sensor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de M208-A4 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
No Preview Available ! Preliminary
Contact Image Sensor (CIS) Module
Product Name
M208-A4
Approval
Notes
CMOS Sensor Inc.
20045, Stevens Creek Blvd.,
Suite 1A
Cupertino, CA., 95014
Tel: (408) 366-2898
Fax: (408) 366-2698
Approved Checked Designed
Issued
June 1, 2002
Revision no.
All specifications of this device are subject to change without notice.
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698
1 page Electro-optical characteristics:
(all shipped modules are tested under the following testing conditions)
Table 2. Operating conditions and typical electro-optical characteristics of the M208-A4
CIS module in Color mode. [under testing cond itions of f = 1 MHz, VDD = 5 V, ILED = 45 mA
(red), 45 mA (green), 45 mA (blue), Ta*(1) = 25 °C]
Symbol
φCP
F*(2)
T *(3)
int
V *(4)
pc
U *(5)
pc
Vd*(6)
Ud*(7)
MTF*(8)
Parameter
Clock frequency
Pixel readout rate
Line scanning rate
Analog output voltage at white paper
White paper non-uniformity
Analog output voltage at dark paper
Dark signal non-uniformity
Modulation transfer function (Green)
(Blue)
(Red)
Test conditions
O.D. *(9) = 0.05 ~ 0.1
O.D. = 0.05 ~ 0.1
light off, O.D. = 0.8
light off, O.D. = 0.8
at 5.7 lp/mm*(10)
min.
0.8
0.03
20
10
15
typ max unit
1.0 MHz
2.0 MHz
8 ms/line
V
50 %
0.4 V
0.3 V
%
%
%
Table 3. Operating conditions and typical electro-optical characteristics of the M208-A4
CIS module in B/W mode. [under testing condition of f = 1 MHz, VDD = 5 V, ILED = 20 mA
(red, green, blue), Ta*(1) = 25 °C]
Symbol
φCP
F*(2)
T *(3)
int
V *(4)
pc
U *(5)
pc
Vd*(6)
Ud*(7)
MTF*(8)
Parameter
Clock frequency
Pixel readout rate
Line scanning rate
Analog output voltage at white paper
White paper non-uniformity
Analog output voltage at dark paper
Dark signal non-uniformity
Modulation transfer function (Green)
Test conditions
O.D. *(9) = 0.05 ~ 0.1
O.D. = 0.05 ~ 0.1
light off, O.D. = 0.8
light off, O.D. = 0.8
at 5.7 lp/mm*(10)
min.
0.8
0.03
20
typ max unit
1.0 MHz
2.0
3
50
0.4
0.3
MHz
ms/line
V
%
V
V
%
Definition:
1. Ta is ambient temperature.
2. F is a pixel readout rate. It is double of the clock frequency.
3. Tint is an integration time or line scanning time. In the B/W operation mode, it is determined
by the interval between two start pulses. For the color operation mode, Tint is at least three
times that of the B/W mode.
4. Vpc(n) is the effective output signal of each pixel. It is defined by:
Vpc = Vp(n) – Vd(n)
Vp (n) is the output signal of nth pixel in the white paper.
Vd (n) is the output signal of nth pixel in the dark paper.
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698
5 Page 20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698
11 Page |
Páginas | Total 17 Páginas | |
PDF Descargar | [ Datasheet M208-A4.PDF ] |
Número de pieza | Descripción | Fabricantes |
M208-A4 | Contact Image Sensor Module | CMOS Sensor |
M208-A6 | Contact Image Sensor Module | CMOS Sensor |
M208-A8 | Contact Image Sensor Module | CMOS Sensor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |