DataSheet.es    


PDF EE55 Data sheet ( Hoja de datos )

Número de pieza EE55
Descripción Air Velocity Switch
Fabricantes ELEKTRONIK 
Logotipo ELEKTRONIK Logotipo



Hay una vista previa y un enlace de descarga de EE55 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! EE55 Hoja de datos, Descripción, Manual

EE55 Series
Air Velocity Switch for
HVAC Applications
The EE55 air velocity switch is designed for standard
HVAC applications with a switching threshold between
2 and 20 m/s (400...4000ft/min). It is based on the
innovative E+E thin film sensor working on the hot film
anemometer principle. This element is distinguished by
its outstanding accuracy over the whole working range
and its approved long term stability.
Moreover, the E+E sensor is much more insensitive to
dust and dirt than other anemometer principles. This
means high reliability and low maintenance costs.
EE55
EE55 consists of an interchangeable sensing probe and
a relay unit suitable for panel mounting. The
electronics integrated in the sensing probe allow a cable length up to 10m (32.8ft) to the relays unit and ensure
high immunity to electromagnetic perturbations.
Low angular dependence and an extension tube allows cost-effective, easy positioning of the sensing probe
in ducts with diameter between 50 and 630mm (1.9 and 24.8”). For smooth plant start-up there is the
possibility to set the delay time between 20 and 100 s.
Typical Applications
HVAC control
environmental control
Features
compact case size
interchangeable sensing probe
easy setting of threshold and preset time
remote sensing probe up to 10m (32.8ft)
easy electric wiring
easy installation
Working Principle
The sensing probe, which can be supplied
with up to maximum 10m (32.8ft) cable, gives
a signal to the relay module which is propor-
tional to the air velocity. This value is com-
pared to the threshold value set on the front
panel of the air velocity switch. The relay is
released if the threshold is reached or exceed-
ed. To start without a hitch there are fixed and
variable time steps integrated.
When switching on the EE55 or in case of
short failure of the main supply > 300 ms (t3)
there is a delay of about 100 ms (t1) till the
relay is switched on. Independent of the true
value the relays remain in this state for a delay
time (t2) (adjustable) between 20 and 100 s.
Only after that the air velocity switch reacts to the TRUE and RATED VALUE. The reaction time is limited by
the response time (t4) of the sensor probe which is about 2 s. The described function is related to continous
operation, which is reached after a warm-up phase of approx. 3 min after applying the supply voltage.
EE55
v2.1
96

1 page




EE55 pdf
Technical Data
Measuring values
Working range threshold
Setting accuracy
Repeatability at 20°C
Hysteresis
Deviation by probe exchange
Temperature dependence
Switching output (relays 250 V)
General
Supply voltage
Type A
Type B
Current consumption
Type A
Type B
Switching delay time (t2)
Response time (t4)
Probe cable length
Electrical connection
Protection class
sensor probe
housing
Electromagnetic compatibility
Temperature range
sensor probe
housing
storage
0.2...2m/s (40...400ft/min)
typ. ± 6 % of end value
± 5 % of measuring value
3 % of measuring value, min. 0.05m/s (10ft/min)
± 5 % of measuring value (max.)
typ. 0.3 % /°C (typ. 0.17 % / °F)
10 A for ohmic load
3 A for inductive load
SELV 24 VAC/DC ± 10 %
230V AC
max. 85 mA DC
max. 20 mAeff
adjustable 20 to 100 s
max. ~150 mAeff
approx. 2 s
2.5m or 10m (8.2 or 32.8ft)
screw terminals up to 1.5 mm2 (AWG 16)
Polycarbonat / IP20
Polycarbonat / IP30
EN 50081-1
EN 61000-6-2
EN 61010-1
-30...80°C (-22...176°F)
-20...60°C (-4...140°F)
-30...60°C (-22...176°F)
SELV = Safety Extra Low Voltage
Dimensions (mm)
1 mm = 0.03937” / 1”= 25.4 mm
EE56
cable length
max. 10m (32.8ft)
marking for air flow
direction
94

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet EE55.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EE50Single Ended TV Secondary Emission ValveMullard
Mullard
EE55Air Velocity SwitchELEKTRONIK
ELEKTRONIK
EE55-VB100Air Velocity SwitchELEKTRONIK
ELEKTRONIK
EE56Air Velocity SwitchELEKTRONIK
ELEKTRONIK

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar