PDF Y0022100M250D0L Datasheet ( Hoja de datos )

Número de pieza Y0022100M250D0L
Descripción Bulk Metal Foil Technology Industrial Precision Resistors
Fabricantes Vishay Siliconix 
Logotipo Vishay Siliconix Logotipo

Total 4 Páginas
Y0022100M250D0L Hoja de datos, Descripción, Manual
VSR Series
Vishay Foil Resistors
Bulk Metal® Foil Technology Industrial Precision Resistors
with TCR of ± 4 ppm/°C and Tolerance of ± 0.01 %
Any value at any tolerance available with resistance range
Bulk Metal® Foil Technology out performs all other resistor
technologies available today for applications that require
high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications.
Generally Bulk Metal® Foil technology allows us to produce
customer orientated products designed to satisfy challenging
and specific technical requirements.
The VSR series of resistors is a low cost version of the well
established S-Series of resistors. These resistors are made
of foil elements so all of the inherent performance of foil is
retained. They do not however, have the same TCR or
tolerance ranges (see table 1 for details). These products
find a wide range of usage in high end stereo equipment and
some grades of test and measurement equipment.
Standoffs are dimensioned to provide a minimum lead
clearance of 0.010 inches between the resistor body and the
printed circuit board, when the standoffs are seated on the
board. This allows for proper cleaning after the soldering
Our Applications Engineering Department is available to
advise and to make recommendations for non standard
technical requirements and special applications, please
contact us.
- 55 °C
200 %
175 %
+ 70 °C
Double Rated Power
150 %
125 %
100 %
Rated Power
75 %
50 %
25 %
Safe operation
for < 150 ppm
R after 2000
hours load-life.
- 75 - 50 - 25
0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Ambient Temperature (°C)
Temperature Coefficient of Resistance (TCR)1):
± 4 ppm/°C (0 °C to + 60 °C)
± 8 ppm/°C (- 55 °C to + 125 °C, + 25 °C Ref.)
Resistance Range: 0.5 Ω to 1 MΩ (higher or RoHS*
lower values of resistance are available)
Resistance Tolerance: to ± 0.01 %
Load Life Stability: to ± 0.005 % at 70 °C, 2000 hours at
rated power
Electrostatic Discharge above 25 000 V
Non Inductive, Non Capacitive Design
Rise time: 1 ns without ringing
Current Noise: - 40 dB
Thermal EMF: 0.05 µV/°C typical
Voltage Coefficient: < 0.1 ppm/V
Inductance: 0.08 µH
Matched Sets Available
Terminal Finishes Available: Lead (Pb)-free
Tin/Lead Alloy
Any value available within resistance range (e.g. 1K234)
Prototype samples available from 48 hours. For more
information, please contact
For better performances please review the S Series
1. For values below 50 Ω please contact Application Engineering
Audio (high end stereo equipment)
Test and Measurement equipment
Precision Amplifiers
(Conceptual Illustration)
Interloop Capacitance
Reduction in Series
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Note: Foil shown in black, etched spaces in white
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63009
Revision: 16-Jul-07
For any questions, contact:

1 page

PáginasTotal 4 Páginas
PDF Descargar[ Y0022100M250D0L.PDF ]

Enlace url

Hoja de datos destacado

Número de piezaDescripciónFabricantes
Y0022100M250D0LBulk Metal Foil Technology Industrial Precision ResistorsVishay Siliconix
Vishay Siliconix

Número de piezaDescripciónFabricantes

High Voltage 3 phase Motor Driver IC.


12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.    |   2019   |  Privacy Policy  |  Contacto  |  Buscar