|
|
PDF T216XW01-V2 Data sheet ( Hoja de datos )
| Número de pieza | T216XW01-V2 | |
| Descripción | TFT LCD Panel | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de T216XW01-V2 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
|
No Preview Available !
Global LCD Panel Exchange Center
www.panelook.com
Product Description: T216XW01 TFT-LCD PANEL with RoHS guarantee
AUO Model Name: T216XW01 V2
Customer Part No/Project Name:
Customer Signature
Date AUO
2009/03/02
Approved By: PM Director / Frank Hsu
Reviewed By: RD Director / Eugene CC Chen
Reviewed By: Project Leader / Sarah Ke
Prepared By: PM / Marcus Lai
©Copyright AU Optronics, Inc.
April, 2007 All Rights Reserved.
No Reproduction and Redistribution Allowed
T216XW01 V2 Ver. 0.0
1/29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page  
Global LCD Panel Exchange Center
www.panelook.com
1. General Description
This specification applies to the 21.6 inch Color TFT-LCD Module T216XW01. This LCD module has a TFT
active matrix type liquid crystal panel with 1,366x768 pixels, and the diagonal size is 21.6 inches. This module
supports 1,366x768 XGA-WIDE mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray
scale or the brightness of the sub-pixel color is determined with an 8-bit gray scale signal for each dot.
The T216XW01 has been designed to apply to 8-bit and 1 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are
very important.
This module is not equipped with inverter board for backlight.
* General Information
Item
Active Screen Size
Display Area
Outline Dimension
Resolution
Pixel Pitch
Pixel Arrangement
Display mode
Display Colors
Typical White Luminance
Surface Treatment
Green
Specification
21.6
477.417 (H) x 268.416 (V)
523 (H) ͪ 315 (V) ͪ 29 (D)
1,366 x 768
0.3495
RGB vertical stripe
Normally Black
16.7M (8-bit for R,G,B)
350 @ 9.5 mA
AG, Haze=11%, 3H
RoHS compliance
Unit
Inch
mm
mm
pixel
mm
Note
w/o Inverter
color
[cd/m2]
©Copyright AU Optronics, Inc.
April, 2007 All Rights Reserved.
No Reproduction and Redistribution Allowed
T216XW01 V2 Ver. 0.0
5/29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page 
Global LCD Panel Exchange Center
www.panelook.com
3-2-2 Backlight Electrical Specification
ʳ Description
1 Operating Voltage
2 Operating Current
3 BL Total Power Dissipation
4 Striking Voltage
кAt 0
кAt 25
5 Striking Time
6 Operating Frequency
.7 PWM Operating Frequency
8 PWM Dimming Duty Ratio
9 Lamp Type
10 Number of Lamps
Vo
Io
PBL
Vstrike
Ts
fo
F_PWM
Min
1060.2
8.0
1860
1550
1000
-
140
Typ
1178
9.5
30
2060
1750
-
58
180
Max Unit
Condition/Note
1295.8
10
36
-
-
1500
-
240
1. Dimming range is set 100%
2. Base on lamp specification,
for each lamp need to be
Vrms applied at least minimum
operating voltage to ensure
each lamp can be normally
worked!
1. Dimming range is set 100%
2. Base on lamp specification,
for each lamp need to be
mArms applied at least minimum
operating current to ensure
each lamp can be normally
worked!
1. Dimming range is set 100%.
2. In order to get typical light
out, the backlight need to be
Watt applied typical power.
3. Input power of JIG BD is
about 75 W (typ.) by AUO’s
measurement!
1. Base on lamp specification,
to ensure each lamp can be
Vrms normally ignited, need to
apply at least minimum
striking voltage to each lamp
1. To ensure each lamp can be
normally ignited, each lamp
msec need to be applied at least
minimum striking voltage
during minimum striking time.
1. Operating frequency is set by
kHz
customers.
2. Need to double confirm
display quality.(*)
1. PWM frequency is set by
Hz
customers.
2. Need to double confirm
display quality.(*)
D_PWM 10
- 100
U type
3
%
Note 2.
Note 3. Duty ratio definition.
ʳ
pcs
Note :
к1, Ta=25±5 , Turn on for 45minutes
2, When PWM dimming ratio is operated within recommend value, backlight can be ensured that there is
no flicker and uniformity issue and display quality of panel can be normally display! When PWM
dimming ration is operated less than recommend value, backlight need to be double confirmed display
quality. LIPS need to be double confirmed feedback signal and all protection function!
©Copyright AU Optronics, Inc.
April, 2007 All Rights Reserved.
No Reproduction and Redistribution Allowed
T216XW01 V2 Ver. 0.0
11/29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page | ||
| Páginas | Total 29 Páginas | |
| PDF Descargar | [ Datasheet T216XW01-V2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| T216XW01-V0 | TFT-LCD PANEL | AUO |
| T216XW01-V1 | TFT LCD Panel | AUO |
| T216XW01-V2 | TFT LCD Panel | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |