DataSheet.es    


PDF US4882 Data sheet ( Hoja de datos )

Número de pieza US4882
Descripción CMOS Low Voltage High Sensitivity Latch
Fabricantes Melexis 
Logotipo Melexis Logotipo



Hay una vista previa y un enlace de descarga de US4882 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! US4882 Hoja de datos, Descripción, Manual

Features and Benefits
Chopper stabilized amplifier stage
Optimized for BDC motor applications
New miniature package / thin, high
reliability package
Operation down to 2.2V
CMOS for optimum stability, quality,
and cost
Low IDD current
Applications
Solid state switch
Brushless DC motor commutation
Speed sensing
Ordering Information
Part No.
Temperature Suffix
US4881
E (-40°C to 85°C)
US4882
E (-40°C to 85°C)
US4882
L (-40°C to 150°C)
Package Code
SO (SOT-23) or UA (TO-92)
SO (SOT-23) or UA (TO-92)
SO (SOT-23) or UA (TO-92)
Contact factory or sales representative for legacy temperature code options
Functional Diagram
Description
The US4881/4882 are bipolar Hall effect sensor
IC’s fabricated from mixed signal CMOS
technology. Each incorporates advanced chopper
stabilization techniques to provide accurate and
stable magnetic switch points. The design
specifications and performance have been
optimized for commutation applications in
brushless DC motors and automotive speed
sensing.
The output transistor of the 4881 will be latched on
(BOP) in the presence of a sufficiently strong South
magnetic field facing the marked side of the
package. Similarly, the output will be latched off
(BRP) in the presence of a North field.
The output transistor of the 4882 will switch on
(BOP) near or after the South to North zero crossing
transition of a multipole ring magnet field facing the
marked side of the package. The output will switch
off (BRP) near or after the zero crossing transition
from South to North Field.
Note: Static sensitive device; please observe ESD precautions.
Reverse VDD protection is not included. For reverse voltage
protection, a 100resistor in series with VDD is recommended.
The SOT-23 device is magnetically reversed from
the UA package. The SOT-23 output transistor will
be latched on (BOP) in the presence of a sufficiently
strong North pole magnetic field subjected to the
marked face.
3901004881
Rev. 008
Page 1
Sep/02

1 page




US4882 pdf
3901004881
Rev. 008
Page 5
Sep/02

5 Page





US4882 arduino
Disclaimer
Devices sold by Melexis are covered by the warranty and patent indemnification provisions appear-
ing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description re-
garding the information set forth herein or regarding the freedom of the described devices from pat-
ent infringement. Melexis reserves the right to change specifications and prices at any time and with-
out notice. Therefore, prior to designing this product into a system, it is necessary to check with
Melexis for current information. This product is intended for use in normal commercial applications.
Applications requiring extended temperature range, unusual environmental requirements, or high
reliability applications, such as military, medical life-support or life-sustaining equipment are specifi-
cally not recommended without additional processing by Melexis for each application.
The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall
not be liable to recipient or any third party for any damages, including but not limited to personal in-
jury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental
or consequential damages, of any kind, in connection with or arising out of the furnishing, perform-
ance or use of the technical data herein. No obligation or liability to recipient or any third party shall
arise or flow out of Melexis’ rendering of technical or other services.
© 2002 Melexis NV. All rights reserved.
3901004881
Rev. 008
For the latest version of this document, go to our website at:
www.melexis.com
Or for additional information contact Melexis Direct:
Europe and Japan:
Phone: +32 13 67 04 95
All other locations:
Phone: +1 603 223 2362
Page 11
QS9000, VDA6.1 and ISO14001 Certified
Sep/02

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet US4882.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
US4881Bipolar Hall SwitchMelexis
Melexis
US4882CMOS Low Voltage High Sensitivity LatchMelexis
Melexis

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar