DataSheet.es    


PDF GS8160Z36T-166I Data sheet ( Hoja de datos )

Número de pieza GS8160Z36T-166I
Descripción 18Mb Pipelined and Flow Through Synchronous NBT SRAM
Fabricantes ETC 
Logotipo ETC Logotipo



Hay una vista previa y un enlace de descarga de GS8160Z36T-166I (archivo pdf) en la parte inferior de esta página.


Total 26 Páginas

No Preview Available ! GS8160Z36T-166I Hoja de datos, Descripción, Manual

100-Pin TQFP
Commercial Temp
Industrial Temp
GS8160Z18/36T-250/225/200/166/150/133
18Mb Pipelined and Flow Through 250 MHz133 MHz
Synchronous NBT SRAM
2.5 V or 3.3 V VDD
2.5 V or 3.3 V I/O
Features
Functional Description
• NBT (No Bus Turn Around) functionality allows zero wait
read-write-read bus utilization; Fully pin-compatible with
both pipelined and flow through NtRAM™, NoBL™ and
ZBT™ SRAMs
• 2.5 V or 3.3 V +10%/–10% core power supply
• 2.5 V or 3.3 V I/O supply
• User-configurable Pipeline and Flow Through mode
• LBO pin for Linear or Interleave Burst mode
• Pin compatible with 2M, 4M, and 8M devices
• Byte write operation (9-bit Bytes)
• 3 chip enable signals for easy depth expansion
• ZZ Pin for automatic power-down
• JEDEC-standard 100-lead TQFP package
-250 -225 -200 -166 -150 -133 Unit
Pipeline
3-1-1-1
tKQ
tCycle
2.5 2.7 3.0 3.4 3.8 4.0 ns
4.0 4.4 5.0 6.0 6.7 7.5 ns
3.3 V
Curr (x18) 280 255 230 200 185 165 mA
Curr (x32/x36) 330 300 270 230 215 190 mA
2.5 V
Curr (x18) 275 250 230 195 180 165 mA
Curr (x32/x36) 320 295 265 225 210 185 mA
Flow
Through
2-1-1-1
tKQ
tCycle
5.5 6.0 6.5 7.0 7.5 8.5 ns
5.5 6.0 6.5 7.0 7.5 8.5 ns
3.3 V
Curr (x18) 175 165 160 150 145 135 mA
Curr (x32/x36) 200 190 180 170 165 150 mA
2.5 V
Curr (x18) 175 165 160 150 145 135 mA
Curr (x32/x36) 200 190 180 170 165 150 mA
The GS8160Z18/36T is an 18Mbit Synchronous Static SRAM.
GSI's NBT SRAMs, like ZBT, NtRAM, NoBL or other
pipelined read/double late write or flow through read/single
late write SRAMs, allow utilization of all available bus
bandwidth by eliminating the need to insert deselect cycles
when the device is switched from read to write cycles.
Because it is a synchronous device, address, data inputs, and
read/ write control inputs are captured on the rising edge of the
input clock. Burst order control (LBO) must be tied to a power
rail for proper operation. Asynchronous inputs include the
Sleep mode enable (ZZ) and Output Enable. Output Enable can
be used to override the synchronous control of the output
drivers and turn the RAM's output drivers off at any time.
Write cycles are internally self-timed and initiated by the rising
edge of the clock input. This feature eliminates complex off-
chip write pulse generation required by asynchronous SRAMs
and simplifies input signal timing.
The GS8160Z18/36T may be configured by the user to operate
in Pipeline or Flow Through mode. Operating as a pipelined
synchronous device, meaning that in addition to the rising edge
triggered registers that capture input signals, the device
incorporates a rising-edge-triggered output register. For read
cycles, pipelined SRAM output data is temporarily stored by
the edge triggered output register during the access cycle and
then released to the output drivers at the next rising edge of
clock.
The GS8160Z18/36T is implemented with GSI's high
performance CMOS technology and is available in a JEDEC-
Standard 100-pin TQFP package.
Flow Through and Pipelined NBT SRAM Back-to-Back Read/Write Cycles
Clock
Address
A
BC
DE
F
Read/Write
R
WR
W
R
W
Flow Through
Data I/O
Pipelined
Data I/O
QA DB QC DD QE
QA DB QC DD QE
Rev: 2.13a 9/2002
1/26
© 1998, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
NoBL is a trademark of Cypress Semiconductor Corp.. NtRAM is a trademark of Samsung Electronics Co.. ZBT is a trademark of Integrated Device Technology, Inc.

1 page




GS8160Z36T-166I pdf
GS8160Z18/36 NBT SRAM Functional Block Diagram
GS8160Z18/36T-250/225/200/166/150/133
Rev: 2.13a 9/2002
5/26
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 1998, Giga Semiconductor, Inc.

5 Page





GS8160Z36T-166I arduino
GS8160Z18/36T-250/225/200/166/150/133
Burst Cycles
Although NBT RAMs are designed to sustain 100% bus bandwidth by eliminating turnaround cycle when there is transition from
read to write, multiple back-to-back reads or writes may also be performed. NBT SRAMs provide an on-chip burst address
generator that can be utilized, if desired, to further simplify burst read or write implementations. The ADV control pin, when
driven high, commands the SRAM to advance the internal address counter and use the counter generated address to read or write
the SRAM. The starting address for the first cycle in a burst cycle series is loaded into the SRAM by driving the ADV pin low, into
Load mode.
Burst Order
The burst address counter wraps around to its initial state after four addresses (the loaded address and three more) have been
accessed. The burst sequence is determined by the state of the Linear Burst Order pin (LBO). When this pin is low, a linear burst
sequence is selected. When the RAM is installed with the LBO pin tied high, Interleaved burst sequence is selected. See the tables
below for details.
Mode Pin Functions
Mode Name
Pin Name State
Function
Burst Order Control
LBO
L
H
Linear Burst
Interleaved Burst
Power Down Control
L or NC
ZZ H
Active
Standby, IDD = ISB
Note:
There pull-up device on the and FT pin and a pull-down device on the ZZ pin, so those input pins can be unconnected and the chip will operate
in the default states as specified in the above tables.
Burst Counter Sequences
Linear Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
1st address 00 01 10 11
2nd address 01 10 11 00
3rd address 10 11 00 01
4th address 11 00 01 10
Note: The burst counter wraps to initial state on the 5th clock.
Interleaved Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
1st address 00 01 10 11
2nd address 01 00 11 10
3rd address 10 11 00 01
4th address 11 10 01 00
Note: The burst counter wraps to initial state on the 5th clock.
BPR 1999.05.18
Rev: 2.13a 9/2002
11/26
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 1998, Giga Semiconductor, Inc.

11 Page







PáginasTotal 26 Páginas
PDF Descargar[ Datasheet GS8160Z36T-166I.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
GS8160Z36T-16618Mb Pipelined and Flow Through Synchronous NBT SRAMETC
ETC
GS8160Z36T-166I18Mb Pipelined and Flow Through Synchronous NBT SRAMETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar