|
|
PDF EL5412 Data sheet ( Hoja de datos )
| Número de pieza | EL5412 | |
| Descripción | 40MHz Rail-to-Rail Input-Output Op Amp | |
| Fabricantes | Intersil | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL5412 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
®
Data Sheet
December 22, 2004
EL5412
FN7394.1
40MHz Rail-to-Rail Input-Output Op Amp
The EL5412 is a low power, high voltage rail-to-rail input-
output amplifier containing four amplifiers in one package.
Operating on supplies ranging from 5V to 15V, while
consuming only 2.5mA per amplifier, the EL5412 has a
bandwidth of 40MHz (-3dB). It also provides common mode
input ability beyond the supply rails, as well as rail-to-rail
output capability. This enables this amplifier to offer
maximum dynamic range at any supply voltage.
The EL5412 also features fast slewing and settling times, as
well as a high output drive capability of 65mA (sink and
source), continuous current, and ±190mA short-circuit
current. These features make this amplifier ideal for high
speed filtering and signal conditioning and VCOM driving
applications. Other applications include battery-powered and
portable devices and anywhere low power consumption is
important.
The EL5412 is available in both the 14-pin TSSOP and 14-
pin HTSSOP packages and features a standard operational
amplifier pinout. They are specified for operation over the full
-40°C to +85°C temperature range.
Ordering Information
PART
NUMBER
EL5412IR
PACKAGE
14-Pin TSSOP
TAPE &
REEL
-
PKG. DWG. #
MDP0044
EL5412IR-T7
14-Pin TSSOP
7”
MDP0044
EL5412IR-T13 14-Pin TSSOP
13”
MDP0044
EL5412IRZ
(See Note)
14-Pin TSSOP
(Pb-free)
-
MDP0044
EL5412IRZ-T7
(See Note)
14-Pin TSSOP
(Pb-free)
EL5412IRZ-T13 14-Pin TSSOP
(See Note)
(Pb-free)
EL5412IRE
14-Pin HTSSOP
EL5412IRE-T7 14-Pin HTSSOP
7”
13”
-
7”
MDP0044
MDP0044
MDP0048
MDP0048
EL5412IRE-T13 14-Pin HTSSOP
13”
MDP0048
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
Features
• 40MHz -3dB bandwidth
• Supply voltage = 4.5V to 16.5V
• Low supply current (per amplifier) = 2.5mA
• High slew rate = 55V/µs
• Unity-gain stable
• Beyond the rails input capability
• Rail-to-rail output swing
• ±190mA output short current
• Pb-Free Available (RoHS Compliant)
Applications
• TFT-LCD panels
• VCOM amplifiers
• Drivers for A-to-D converters
• Data acquisition
• Video processing
• Audio processing
• Active filters
• Test equipment
• Battery-powered applications
• Portable equipment
Pinout
EL5412
(14-PIN TSSOP, 14-PIN HTSSOP)
TOP VIEW
VOUTA 1
VINA- 2
VINA+ 3
-
+
VS+ 4
VINB+ 5
VINB- 6
+
-
VOUTB 7
14 VOUTD
13 VIND-
-
+ 12 VIND+
11 VS-
10 VINC+
+
- 9 VINC-
8 VOUTC
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
1 page  
Typical Performance Curves
EL5412
500
VS=±5V
TA=25°C
400
Typical
Production
Distortion
300
200
100
0
INPUT OFFSET VOLTAGE (mV)
FIGURE 1. INPUT OFFSET VOLTAGE DISTRIBUTION
25
VS=±5V
20
15
10
Typical
Production
Distortion
5
0
INPUT OFFSET VOLTAGE DRIFT, TCVOS (µV/°C)
FIGURE 2. INPUT OFFSET VOLTAGE DRIFT
5
4
3
2
1
0
-50 -10 30
70 110 150
TEMPERATURE (°C)
FIGURE 3. INPUT OFFSET VOLTAGE vs TEMPERATURE
0.008
VS=±5V
0.004
0
-0.004
-0.008
-0.012
-50 -10 30 70 110 150
TEMPERATURE (°C)
FIGURE 4. INPUT BIAS CURRENT vs TEMPERATURE
4.97
4.96
VS=±5V
IOUT=5mA
4.95
4.94
4.93
-50 0 50 100 150
TEMPERATURE (°C)
FIGURE 5. OUTPUT HIGH VOLTAGE vs TEMPERATURE
-4.91
-4.92
VS=±5V
IOUT=-5mA
-4.93
-4.94
-4.95
-4.96
-4.97
-50 0 50 100 150
TEMPERATURE (°C)
FIGURE 6. OUTPUT LOW VOLTAGE vs TEMPERATURE
5 FN7394.1
December 22, 2004
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet EL5412.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL5410 | 30MHz Rail-to-Rail Input-Output Op Amps |  Intersil Corporation |
| EL5410CR | 30MHz Rail-to-Rail Input-Output Op Amps |  Elantec Semiconductor |
| EL5410CR | 30MHz Rail-to-Rail Input-Output Op Amps | Intersil Corporation |
| EL5410CR-T13 | 30MHz Rail-to-Rail Input-Output Op Amps | Elantec Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |