DataSheet.es    


PDF S4130B Data sheet ( Hoja de datos )

Número de pieza S4130B
Descripción PCB Relay
Fabricantes ALTRONICS 
Logotipo ALTRONICS Logotipo



Hay una vista previa y un enlace de descarga de S4130B (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! S4130B Hoja de datos, Descripción, Manual

S 4128B
S 4130B
S 4132B
PCB Relay Telecom 5V 2A DPDT
PCB Relay Telecom 12V 2A DPDT
PCB Relay Telecom 24V 2A DPDT
Supplier Ordering Info
P-5
P-12
P-24
19/04/10
Features
DIL Pitch Terminals .High Sensitivity :0.14W or 0.10W Nominal Power
Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VAC
Monostable or bistable relays Single and double Coil magnet latching Type available
Application for Telecommunication Equipment,Office Equipment,Security Alarm Systems, Measuring instruments,
Medical Monitoring Equipment,Audio Visual Equipment, Flight Simulator,Sensor Control
Contact Data
Contact Arrangement
Contact Material
Contact Rating (resistive)
Max. Switching Power
Max. Switching Voltage
Contact Resistance or
Voltage drop
Operation
life
Electrical
Mechanical
2C DPDT(B-M) Bifurcated Crossbar
AgPd(Stationary Contact: Gold clad )
1A,2A/30VDC; 0.5A/125VAC
60W
62.5VA
Min. Switching load 0.01mA/10mV Reference Value
220VDC 250VAC
Max. Switching Current:2A
50m
Item 4.12 of IEC 61810-7
1A/30VDC 2 105 Ag Ni 1 105
0.5A/125VAC 1 105
108
Item 4.30 of IEC 61810-7
Item 4.31 of IEC 61810-7
CAUTION:
Relays previously tested or used above 10mA resistive at 6V maximum DC or peak AC open circuit are not
recommended for subsequent use in low level applications.
Coil Parameter
Dash
numbers
Coil voltage
VDC
Rated
Max.
Coil resistance
10%
Pick up voltage
VDC(max)
(75%of rated
voltage )
Release voltage
VDC(min)
(10% of rated
voltage)
Coil
power
W
Operate
Time
ms
Release
/Reset
Time
ms
S 4128B
S 4130B
S 4132B
5 12.5
12 30.0
24 48.0
178
1028
2880
3.75
9.00
18.0
0.5 0.14
1.2 0.14 Approx.2 Approx.1
2.4 0.20
CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design
criteria.
3.When latching relays are installed in equipment, the latch and reset coil should not be pulsed
simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width
should be a minimum of three times the specified operate time of the relay. If these conditions are not
followed, it is possible for the relay to be in the magnetically neutral position .
1

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet S4130B.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
S4130BPCB RelayALTRONICS
ALTRONICS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar