DataSheet.es    


PDF FT4232H Data sheet ( Hoja de datos )

Número de pieza FT4232H
Descripción USB Hi-Speed FT4323H Evaluation Module
Fabricantes FTDI 
Logotipo FTDI Logotipo



Hay una vista previa y un enlace de descarga de FT4232H (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! FT4232H Hoja de datos, Descripción, Manual

Future Technology Devices International Ltd.
FT4232H Mini Module
USB Hi-Speed FT4323H Evaluation
Module
Datasheet
Document Reference No.: FT_000115
Version 1.5
Issue Date: 2009-08-11
Future Technology Devices International Ltd (FTDI)
Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom
Tel.: +44 (0) 141 429 2777 Fax: + 44 (0) 141 429 2758
E-Mail (Support): [email protected] Web: http://www.ftdichip.com
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology
Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your
statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary
information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park,
Glasgow, G41 1HH, United Kingdom. Scotland Registered Number: SC136640
Copyright © 2009 Future Technology Devices International Limited

1 page




FT4232H pdf
`
3 Electrical Details
Document Reference No.: FT_000115
FT4232H Mini Module USB Hi-Speed FT4323H Evaluation Module Datasheet
Version 1.5
Clearance No.: FTDI#73
The electrical details and connections to the FT4232H Mini Module are shown in Figure 3.1 and tables 3.1
and 3.2.
Figure 3.1 FT4232H Mini Module Electrical Connections (Top View)
Connector Pin
CN2-1
CN2-2
CN2-3
CN2-4
CN2-5
CN2-6
CN2-7
CN2-8
CN2-9
CN2-10
CN2-11
CN2-12
CN2-13
CN2-14
CN2-15
CN2-16
CN2-17
CN2-18
Name
V3V3
GND
V3V3
GND
V3V3
GND
AD0
RESET#
AD2
AD1
VIO
AD3
AD5
AD4
AD7
AD6
BD1
BD0
Description
3.3VDC generated from VCC (output)
0V Power pin
3.3VDC generated from VCC (output)
0V Power pin
3.3VDC generated from VCC (output)
0V Power pin
FT4232H AD0 pin
FT4232H RESET# pin
FT4232H AD2 pin
FT4232H AD1 pin
Connected to all FT4232H VCCIO pins (input)
FT4232H AD3 pin
FT4232H AD5 pin
FT4232H AD4 pin
FT4232H AD7 pin
FT4232H AD6 pin
FT4232H BD1 pin
FT4232H BD0 pin
Copyright © 2009 Future Technology Devices International Limited
4

5 Page





FT4232H arduino
Document Reference No.: FT_000115
FT4232H Mini Module USB Hi-Speed FT4323H Evaluation Module
Datasheet Version 1.5
Clearance No.: FTDI#73
Appendix A – FT4232H EEPROM Configuration
The FT4232H Mini Module utilizes an EEPROM which contains the USB configuration descriptors for the
FT4232H. When the Mini Module is plugged into a PC or a USB reset is performed, the PC will read these
descriptors. The default values stored into the EEPROM are defined in Table 6.1.
Parameter
Value
Notes
USB Vendor ID (VID)
0403h
FTDI default VID (hex)
USB Product UD (PID)
6011h
FTDI default PID (hex)
Serial Number Enabled?
Yes
Serial Number
See Note
A unique serial number is generated and programmed into
the EEPROM during device final test.
Pull down I/O Pins in USB
Suspend
Disabled
Enabling this option will make the device pull down on the
UART interface lines when the power is shut off (PWREN#
is high).
Manufacturer Name
FTDI
Product Description
FT4232H_MM
Max Bus Power Current
500mA
Power Source
Bus Powered
Device Type
FT4232
Returns USB 2.0 device description to the host.
USB Version
0200
Note: The device is be a USB 2.0 Full Speed device
(12Mb/s) as opposed to a USB 2.0 High Speed device
(480Mb/s).
Remote Wake Up
Enabled
Taking RI# low will wake up the USB host controller from
suspend.
High Current I/Os
Enabled
Enables the high drive level on the UART and CBUS I/O
pins.
Load VCP Driver
Disabled
Makes the device load the VCP driver interface for the
device.
Table 6.1 Default Internal EEPROM Configuration
The EEPROM on the FT4232H Mini Module can be re-programmed over USB using the utility program
MPROG. MPROG can be downloaded from the www.ftdichip.com. Version 3.5 or later is required for the
FT4232H chip. Users who do not have their own USB Vendor ID but who would like to use a unique
Product ID in their design can apply to FTDI for a free block of unique PIDs. Contact FTDI support for this
service.
Copyright © 2009 Future Technology Devices International Limited
10

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet FT4232H.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FT4232HUSB Hi-Speed FT4323H Evaluation ModuleFTDI
FTDI
FT4232HQuad High Speed USB to Multipurpose UART/MPSSE ICFTDI
FTDI
FT4232HLQuad High Speed USB to Multipurpose UART/MPSSE ICFTDI
FTDI
FT4232HQQuad High Speed USB to Multipurpose UART/MPSSE ICFTDI
FTDI

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar