DataSheet.es    


PDF LM191-104X01 Data sheet ( Hoja de datos )

Número de pieza LM191-104X01
Descripción Sunlight Readable LCD Module
Fabricantes Landmark Technology 
Logotipo Landmark Technology Logotipo



Hay una vista previa y un enlace de descarga de LM191-104X01 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! LM191-104X01 Hoja de datos, Descripción, Manual

LM191-104X01 - 10.4"
Sunlight Readable LCD Module
Introduction
LM191-104X01 is a 10.4" sunlight readable LCD module. The module consists of a Hydis HV104X01-100 TFT
color LCD panel and a Landmark VHB (very high brightness) backlight. The module is in a universal package that
is the standard for Landmark’s 10.4" sunlight readable LCD modules.
At a backlight power of 19 Watts, the LM191-104X01 module delivers a screen luminance of about 1,550 Cd/m2
(nits). At this brightness level, the display is highly readable under bright ambient lighting, including direct outdoor
sunlight. Also, the Hydis HV104X01-100 is an industrial LCD with a wide operating temperature range, from -20
to +70oC, making this LCD module specifically suitable for demanding outdoor applications.
Characteristics (Note 1, 2)
Parameters
Typical Value
Units
Conditions
LCD Screen Luminance
1,550
Cd/m2
LCD in OFF state (normally White)
Luminance Uniformity
20% or better
Note 3
Backlight Power Consumption
20
Watts
Excluding inverter losses
Screen Luminance Dimming Ratio 200:1
With LMT BI200A inverter
Typical LCD Contrast Ratio
600:1
White vs. Black (measured in the
dark along the normal direction)
Typical Viewing Angles
3:00 direction
9:00 direction
6:00 direction
12:00 direction
LCD Screen Chromaticity (x, y)
White
Red
Green
Blue
89
89
89
89
(0.329, 0.363)
(0.600, 0.352)
(0.314, 0.550)
(0.149, 0.149)
Degrees
Degrees
Degrees
Degrees
Contrast ratio ? 10
Contrast ratio ? 10
Contrast ratio ? 10
Contrast ratio ? 10
Measured at the normal direction
Measured at the normal direction
Measured at the normal direction
Measured at the normal direction
Response Speed
Rise time + Fall time
28
msec
Luminance transition, 10% - 90% for
rise time, 90% - 10% for fall time
LCD Module Weight
580
Grams
Note 1: Please refer to “Hydis HV104X01-100 LCD Specification” for detailed electrical specifications and general precautions.
Note 2: All data is measured at 25o C ± 2oC ambient temperature.
Note 3: Uniformity = (Lmax - Lmin) / (Lmax + Lmin) where Lmax (Lmin) is the maximum (minimum) luminance measured using a 10
mm diameter meter aperture over the LCD active area, except the last 10 mm area from the edges.
Landmark Technology 172 Component Drive San Jose, CA 95131 (408) 434-9302 Fax: (408) 434-0954
04/2007
www.landmarktek.com

1 page




LM191-104X01 pdf
Landmark Technology
LM191-104X01 P.5
LCD Module Mechanical Dimensions
Landmark Technology 172 Component Drive San Jose, CA 95131 (408) 434-9302 Fax: (408) 434-0954
04/2007
www.landmarktek.com

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet LM191-104X01.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LM191-104X01Sunlight Readable LCD ModuleLandmark Technology
Landmark Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar