DataSheet.es    


PDF B084SN02 Data sheet ( Hoja de datos )

Número de pieza B084SN02
Descripción SVGA Color TFT LCD Module
Fabricantes AUO 
Logotipo AUO Logotipo



Hay una vista previa y un enlace de descarga de B084SN02 (archivo pdf) en la parte inferior de esta página.


Total 23 Páginas

No Preview Available ! B084SN02 Hoja de datos, Descripción, Manual

Version: 0.3
Total Pages: 22
Date: 2003/01/20
Product Functional Specification
8.4 inch SVGA Color TFT LCD Module
Model Name: B084SN02
( ) Preliminary Specification
(u) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optroncis, Inc.
2003 All Right Reserved.
No Reproduction and Redistribution Allowed.
B084SN02 Ver.03
1/23

1 page




B084SN02 pdf
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnection from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a module has to be put back into the packing container slot after once it
was taken out from the container, do not press the center of the CCFL Reflector
edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise
the TFT module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the interface Connector of the TFT module.
11) After installation of the TFT module into an enclosure, do not twist nor bend the
TFT module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from
outside. Otherwise the TFT module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD
module should be supplied by power complied with requirements of Limited Power
Source, or be applied exemption.
14) The LCD module is designed so that the CFL in it is supplied by Limited Current
Circuit. Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright AU Optroncis, Inc.
2003 All Right Reserved.
No Reproduction and Redistribution Allowed.
B084SN02 Ver.03
5/23

5 Page





B084SN02 arduino
5.0 Signal Interface
5.1 Connectors
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be
following components.
Connector Name / Designation
Manufacturer
Type / Part Number
Mating Connector / Part Number
Mating Connector / Part Number
For Signal Connector
HIROSE
HRS DF 19K -20P -1H
HRS DF19G-20S-1C (WIRE TYPE))
HRS DF19-20S-1F (FPC TYPE)
Connector Name / Designation
Manufacturer
Type / Part Number
Mating Connector / Part Number
For Lamp Connector
JST
BHSR-02VS -1
SM02B-BHSS-1-TB
5.2 Signal Pin
Pin No.
1
3
5
7
9
11
13
15
17
19
Signal Name
VDD
GND
RxIN0 -
GND
RxIN1+
RxIN2 -
GND
CKIN+
NC
GND
Pin No.
2
4
6
8
10
12
14
16
18
20
Signal Name
VDD
GND
RxIN0+
RxIN1 -
GND
RxIN2+
CKIN-
GND
NC
GND
(C) Copyright AU Optroncis, Inc.
2003 All Right Reserved.
No Reproduction and Redistribution Allowed.
B084SN02 Ver.03
11/23

11 Page







PáginasTotal 23 Páginas
PDF Descargar[ Datasheet B084SN02.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
B084SN01Module Specification for 8.4 Inch TFT LCD Modulesau
au
B084SN01-22.4 Inch SVGA Color TFT LCD Moduleau
au
B084SN02SVGA Color TFT LCD ModuleAUO
AUO
B084SN03-V0SVGA Color TFT LCD ModuleAU
AU

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar