DataSheet.es    


PDF AM-480272-043BT Data sheet ( Hoja de datos )

Número de pieza AM-480272-043BT
Descripción LCD Module
Fabricantes AMSON 
Logotipo AMSON Logotipo



Hay una vista previa y un enlace de descarga de AM-480272-043BT (archivo pdf) en la parte inferior de esta página.


Total 17 Páginas

No Preview Available ! AM-480272-043BT Hoja de datos, Descripción, Manual

AM-480272-043BT
Version: A
2013-01-07
Specification for Approval
Customer:
Model Name:
Supplier Approval
Customer approval
R&D Designed R&D Approved QC Approved
Peter Peng Jun
YU DU AMSON ELECTRONICS CO.,LTD.
Page 1 of 17

1 page




AM-480272-043BT pdf
AM-480272-043BT
3. External Dimensions
Version: A
2013-01-07
YU DU AMSON ELECTRONICS CO.,LTD.
Page 5 of 17

5 Page





AM-480272-043BT arduino
AM-480272-043BT
Version: A
2013-01-07
10. Reliability Test Conditions and Methods
NO. TEST ITEMS
TEST CONDITION
INSPECTION AFTER
TEST
High
Temperature
Storage
Low
Temperature
Storage
High
Temperature
Operating
Low
Temperature
Operating
Temperature
Cycle(Storage)
Damp Proof
Test (Storage)
Vibration Test
Drooping Test
80°C±2°C×200Hours
-30°C±2°C×200Hours
70°C±2°C×120Hours
-20°C±2°C×120Hours
-20°C
(30min)
25°C
70°C
(5min) (30min)
1cycle
Total 10cycle
50°C±5°C×90%RH×120Hours
Frequency:10Hz~55Hz~10Hz
Amplitude:1.5M
X,Y,Z direction for total 3hours
(Packing Condition)
Drop to the ground from 1M height
one time
every side of carton.
(Packing Condition)
Inspection after
2~4hours storage at
room temperature,
the samples should
be free from defects:
1, Air bubble in the
LCD.
2, Seal leak.
3, Non-display.
4, Missing segments.
5, Glass crack.
6, Current IDD is
twice higher than
initial value.
7, The surface shall
be free from damage.
8, The electric
characteristic
requirements shall be
satisfied.
ESD Test
Voltage:±8KV,R:330,C:150PF,Air
Mode,10times
REMARK:
1, The Test samples should be applied to only one test item.
2, Sample side for each test item is 5~10pcs.
3,For Damp Proof Test, Pure water(Resistance10M)should be used.
4,In case of malfunction defect caused by ESD damage, if it would be recovered to
normal state after resetting, it would be judge as a good part.
5, EL evaluation should be accepted from reliability test with humidity and
temperature: Some defects such as black spot/blemish can happen by natural
chemical reaction with humidity and Fluorescence EL has.
6, Failure Judgment Criterion: Basic Specification Electrical Characteristic,
Mechanical Characteristic, Optical Characteristic.
YU DU AMSON ELECTRONICS CO.,LTD.
Page 11 of 17

11 Page







PáginasTotal 17 Páginas
PDF Descargar[ Datasheet AM-480272-043BT.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AM-480272-043BTLCD ModuleAMSON
AMSON

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar