|
|
PDF KP3000 Data sheet ( Hoja de datos )
| Número de pieza | KP3000 | |
| Descripción | Digital Program Setter | |
| Fabricantes | CHINO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KP3000 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
INST.No. INE-811
Digital Program Setter
KP3000
[General]
1 page  
■Before use
After opening the pack, confirm the following before using the product. Although it is rare but if you notice
anything wrong, contact your dealer or our nearest office.
1. Confirm the exterior
Confirm that the product is not broken on the outer side.
2. Confirm the model code
Confirm that the model code is that of the model that you purchase.
◆Model code label and its location
A label as shown below is pasted on the upper surface of the setter unit.
KP3□□□□□□□－□□□
□□□□□□□□□
MADE IN JAPAN
← Model code
← Serial number
3. Confirm the accessories
The following accessories are attached to the setter, confirm them.
Name
Mounting bracket
Quantity
2 (1 set)
Instruction manual (General)
Instruction manual
(Communications interface)
1
1
Remarks
For panel mounting
This document
Attached to communications specifications only
(in CD-R)
When accessories are requested separately, sometimes those are also attached.
Attention
1. Do not drop the instrument while taking it out of the box.
2. When transporting this instrument, pack the instrument in the box and then put it with cushions in another
box. We recommend keeping the box for transport.
3. When not using the instrument for a while after taking it from the panel, put the instrument in the box and
store at room temperature and in a dust free atmosphere.
-2-
5 Page 
4-2-2. Installation condition
Precaution In order to avoid accidents always read and understand these contents.
1. Environment
① In a room.
② Away from direct sunlight.
③ Away from high temperatures.
④ Away from vibrations and shocks.
⑤ Away from liquids (water etc.).
⑥ Away from condensation.
⑦ Under 'Excess voltage category Ⅱ, Pollution level 2' based on EN standards.
2. Atmosphere
① Away from strong noise, static electricity, electric field, magnetic field etc.
② Surrounding temperature within -10 to 50°C (Less than 40°C in case of closed instrumentation),
surrounding humidity within 10-90% RH.
③ Variation in temperature is less.
④ Away from corrosive gas, explosive gas, ignition gas and combustible gas.
⑤ Away from salt, iron and conductive material (Carbon, iron etc.).
⑥ Away from steam, oil and chemicals etc.
⑦ Away from dust etc.
⑧ Away from the surroundings where high temperature is generated.
⑨ Away from places where temperature remains stored.
⑩ Lot of space above the upper part of the product.
⑪ Away from wind.
3. Mounting position
① Installation height is less than 2,000 m above the sea level
② Mounting position is approximately 1.5m (Approximately eye level position of a person).
③ Mounting orientation longitudinal tilting is less than ±10° lateral tilting is less than ±10°.
4. Other
① Do not wipe the setter with an organic solvent (like alcohol).
② To avoid malfunctioning of the setter, do not use cell phones in its vicinity.
③ An obstacle may be created for television and radio sets placed near the setter.
-8-
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet KP3000.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KP3000 | Digital Program Setter | CHINO |
| KP3000A | Phase Control Thyristor |  HUAJING |
| KP3000A-12 | Phase Control Thyristor |  Shenghe Power |
| KP3000A-1200 | Phase Control Thyristor | Shenghe Power |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |