DataSheet.es    


PDF VA2012w-1 Data sheet ( Hoja de datos )

Número de pieza VA2012w-1
Descripción Color TFT LCD Display
Fabricantes ViewSonic 
Logotipo ViewSonic Logotipo



Hay una vista previa y un enlace de descarga de VA2012w-1 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! VA2012w-1 Hoja de datos, Descripción, Manual

Service Manual
ViewSonic VA2012w-1
VA2012wb-1
Model No. VS10859
20” Color TFT LCD Display
(VA2012w-1_VA2012wb-1_SM Rev. 1b Jun. 2006)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583

1 page




VA2012w-1 pdf
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
should be supplied with power that complies with the requirements of Limited Power Source
(IEC60950 or UL1950), or an exemption should be applied for.
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.
ViewSonic Corporation
2
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1

5 Page





VA2012w-1 arduino
21. 1280x 720 @ 60Hz, 45kHz
22. 1280 x 1024 @ 60Hz, 63.4kHz
23. 1280 x 1024 @ 75Hz, 79.97kHz
24. 1600 x 1200 @ 60Hz, 75kHz
25. 1600 x 1200 @ 70Hz, 87.5kkHz
26. 1600 x 1200 @ 75Hz, 93.8kHz
27. 1680 x 1050 @ 60Hz, 65.3 kHz
28. 1680 x 1050 @ 75Hz, 82.3 kHz
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes Yes
Yes No
Primary Presets
“1680 x 1050” @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO
configuration
Changing Modes
Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding
“Auto Adjust” time
Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting
when execute “Auto Adjust”
The monitor needs to do “Auto Adjust” the first time a new mode is detected
(see section “0-Touch™ Function Actions”)
While running Change Mode, Auto Adjust or Memory Recall, the image shall blank
FRONT PANEL CONTROLS AND INDICATORS
Front Panel Hardware Controls
Power Switch (Front Head)
Power LED (Front Head)
Front Panel Controls (Head)
[ ] [ 1 ] [ 2 ] [] [] [;+][;-][;X]
Power Control, soft Power Switch.
Green – ON
Orange – Active Off
Dark = Soft Power Switch OFF
[ ] Power
[ 1 ] Button 1
[ 2 ] Button 2
[] Up arrow button
[] Down arrow button
[;+] Volume+
[;-] Volume-
[;X] Mute
Reaction Time
Note: Power Button, Button 1, Button 2, and
Mute Button must be one-shot logic
operation. (i.e. there should be no cycling)
OSD must fully appear within 0.5s after
pushing Button 1
ViewSonic Corporation
8
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet VA2012w-1.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VA2012w-1Color TFT LCD DisplayViewSonic
ViewSonic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar