DataSheet.es    


PDF M230UW01-V0 Data sheet ( Hoja de datos )

Número de pieza M230UW01-V0
Descripción Wide-UXGA Color TFT-LCD Module
Fabricantes AUO 
Logotipo AUO Logotipo



Hay una vista previa y un enlace de descarga de M230UW01-V0 (archivo pdf) en la parte inferior de esta página.


Total 25 Páginas

No Preview Available ! M230UW01-V0 Hoja de datos, Descripción, Manual

Product Specification
M230UW01 V.0
AU OPTRONICS CORPORATION
Product Specification
23.0Wide-UXGA Color TFT-LCD Module
Model Name: M230UW01 V.0
Approved by
Prepared by
CC Chiu GaryChen
DDBU Marketing Division / AU Optronics corporation
Customer
Checked & Approved by
Ver0.1
1

1 page




M230UW01-V0 pdf
Product Specification
M230UW01 V.0
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a module has to be put back into the packing container slot after once it was taken out from
the container, do not press the center of the LED reflector edge. Instead, press at the far ends of the
LEDreflector edge softly. Otherwise the TFT module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT module.
11) After installation of the TFT module into an enclosure (Desktop monitor Bezel, for example), do not
twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise
the TFT module may be damaged.
Ver0.1
5

5 Page





M230UW01-V0 arduino
Product Specification
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
4.1 TFT LCD Module
Item
Logic/LCD Drive
Symbol
VIN
Min
+10.8
Max
+13.2
M230UW01 V.0
Unit
[Volt]
Conditions
Note 1,2
4.2 Backlight Unit
Item
LED R current
LED G current
LED B current
Symbol
IrLED
IgLED
IbLED
Min
413.2
456.0
456.0
Max
435
480
480
Unit
[mA] rms
[mA] rms
[mA] rms
Conditions
Note 1,2
4.3 Absolute Ratings of Environment (TETANTIVE)
Item
Operating
Operating Humidity
Storage Temperature
Storage Humidity
Symbol
TOP
HOP
TST
HST
Min
0
8
- 20
8
Max
40
60
60
60
Unit
[oC]
[%RH]
[oC]
[%RH]
Note 1: With in Ta (25)
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
Conditions
Note 3
Relative Humidity %
60%
40%
20%
Storage
Range
Twb=30
T=40,H=60%
T=45,H=45%
T=50,H=35%
Operation Range
Storage
Range
T=60,H=20%
0 -20
0 40
Temperature
50 60
Ver0.1
11

11 Page







PáginasTotal 25 Páginas
PDF Descargar[ Datasheet M230UW01-V0.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
M230UW01-V0Wide-UXGA Color TFT-LCD ModuleAUO
AUO

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar