|
|
PDF IAP200B120 Data sheet ( Hoja de datos )
| Número de pieza | IAP200B120 | |
| Descripción | 200A / 1200V Full-Bridge IGBT Inverter | |
| Fabricantes | APPLIED POWER SYSTEMS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IAP200B120 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
APPLIED
POWER
SYSTEMS,
INC.
IAP200B120 SixPac™
200A / 1200V Full-Bridge IGBT Inverter
FEATURES INCLUDE
Multi-Function Power Assembly
Compact Size – 9” H X 17.60” W X 11.00” D
DC Bus Voltages to 850VDC
Snubber-less operation to 650VDC
Switching frequencies to over 20kHz
Protective circuitry with fail-safe opto-isolated fault annunciation,
including:
Over current
Short circuit
Over voltage
P.S. undervoltage
Over Temperature
Opto-isolated or fiber-optic gate drive and fault signal output for
electrical isolation and noise immunity
Integrated cooling with temperature sensors and feedback
Many options
Configurable Power
The SixPac™ is a flexible, highly integrated IGBT
based power assembly with a wide range of
applications. These include inverters for motor
controls, switch mode power supplies (SMPS),
UPS, welders, etc. The SixPac™ can be operated
at frequencies to over 20kHz. The SixPac™ can be
configured as a full bridge or three-phase bridge
inverter mounted on an air-cooled or liquid-cooled
heat sink. Configurations include options for (full,
half or no control) converter input circuitry, inverter
output circuitry, cooling and a wide variety of
drivers and safety features for the converter front
end and IGBT inverter output stage.
To operate at high switching frequencies, the
SixPac™ utilizes a low inductance laminated bus
structure, optically isolated or fiber optically
coupled gate drive interfaces, isolated gate power
supplies and a DC-link capacitor bank.
The SixPac™ provides built in protection features
including: over voltage, under voltage lockout, over
current, over temperature, short circuit and optional
airflow or liquid flow indicators.
Flexibility is a key feature of the SixPac™. Options
include: a choice of converter front ends, rectifier,
half or full SCR control, with or without SCR gate
firing boards and soft-start circuitry. A choice of
cooling methods, forced air or liquid is also
available. Customer provided PWM is optically
coupled or a fiber optic link can be provided to the
IGBT interface. Current feedback is provided by
Hall effect transducers.
The SixPac™ is rated to maximum input voltages
up to 850 VDC, switching frequencies to over
20kHz, includes many safety features to protect
the IGBTs and output circuitry and can be
configured to meet your application.
Schematic:
124 Charlotte Avenue Hicksville, NY 11801 Ph: 516.935.2230 Fax: 516.935.2603 Website: www.appliedps.com
Page 1 of 6
Rev. 120706-01
1 page  
APPLIED
POWER
SYSTEMS,
INC.
IAP200B120 SixPac™
200A / 1200V Full-Bridge IGBT Inverter
Interface
Pin # Signal Name
1 Shield
2 PWM A-
3 Phase A Error1
4 PWM A+
5 PWM B-
6 Phase B Error1
7 PWM B+
8 Not Used
9 Not Used
10 Not Used
11 OverTemp1
12 Not Connected
13 DC Link Voltage
14 24VDC Input Power2
15 24VDC Input Power2
16 15VDC Input Power2
17 15VDC Input Power2
18 GND
19 GND
20 Heatsink Temperature
21 GND3
22 IOUT Phase A
23 GND3
24 IOUT Phase B
25 Not Used
26 Not Used
Description
Connected to circuit ground
0-15V signal controlling the duty cycle of A- IGBT
Open collector output, external pull-up resistor required.
LOW=No Error; Floating=Phase A overcurrent or short circuit
0-15V signal controlling the duty cycle of A+ IGBT
0-15V signal controlling the duty cycle of B- IGBT
Open collector output, external pull-up resistor required.
LOW=No Error; Floating=Phase A overcurrent or short circuit
0-15V signal controlling the duty cycle of B+ IGBT
Open collector output, external pull-up resistor required.
LOW=No Error; Floating=Heatsink overtemp
Analog voltage representation of DC link voltage
20-30VDC input voltage range
20-30VDC input voltage range
14.4-18VDC input voltage range
14.4-18VDC input voltage range
Ground reference for 15 and 24VDC inputs
Ground reference for 15 and 24VDC inputs
Analog voltage representation of heatsink temperature
Tied to pins 18 and 19
Analog voltage representation of phase A output current
Tied to pins 18 and 19
Analog voltage representation of phase B output current
NOTES:
1.
2.
3.
Open collectors can be pulled up to 30VDC Max and sink 50mA continuous.
DO NOT connect a 15VDC and 24VDC source to the unit at the same time. Use one or the other.
GND signals to be used for analog feedback signals, i.e. twisted pair with IOUT Phase A.
Gate Drive Interface Connector
Description
Symbol
Gate Drive Interface Header
J1
Recommending Mating Socket -
Recommended Strain Relief
-
Type
0.100” x 0.100” latching header, 26 pin
0.100” x 0.100” IDC socket, 26 pin
Plastic strain relief
Manufacturer
3M #3429-6002 or equivalent
3M #3399-7600 or equivalent
3M #3448-3026 or equivalent
124 Charlotte Avenue Hicksville, NY 11801 Ph: 516.935.2230 Fax: 516.935.2603 Website: www.appliedps.com
Page 5 of 6
Rev. 120706-01
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet IAP200B120.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IAP200B120 | 200A / 1200V Full-Bridge IGBT Inverter | APPLIED POWER SYSTEMS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |