|
|
PDF TJ150F06M3L Data sheet ( Hoja de datos )
| Número de pieza | TJ150F06M3L | |
| Descripción | MOSFETs | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TJ150F06M3L (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
MOSFETs Silicon P-Channel MOS (U-MOS)
TJ150F06M3L
1. Applications
• Relay Drivers
• Motor Drivers
2. Features
(1) Low drain-source on-resistance: RDS(ON) = 4.3 mΩ (typ.) (VGS = -10 V)
(2) Low leakage current: IDSS = -10 µA (max) (VDS = -60 V)
(3) Enhancement mode: Vth = -2.0 to -3.0 V (VDS = -10 V, ID = -1 mA)
3. Packaging and Internal Circuit
TJ150F06M3L
1: Gate
2: Drain (Heatsink)
3: Source
TO-220SM(W)
4. Absolute Maximum Ratings (Note) (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Rating
Unit
Drain-source voltage
VDSS -60 V
Gate-source voltage
VGSS
-20/+10
Drain current (DC)
(Note 1)
ID
-150
A
Drain current (pulsed)
(Note 1)
IDP
-450
Power dissipation
(Tc = 25)
PD 300 W
Single-pulse avalanche energy
(Note 2)
EAS
430 mJ
Avalanche current
IAR
-150
A
Channel temperature
(Note 3)
Tch
175
Storage temperature
(Note 3)
Tstg
-55 to 175
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1 2012-01-13
Rev.1.0
1 page  
TJ150F06M3L
8. Moisture-Proof Packing
This device is packed in a moisture-proof laminated aluminum bag.
8.1. Precautions for Transportation and Storage (Note)
(1) Avoid excessive vibration during transportation.
(2) Do not toss or drop the packed devices to avoid ripping of the bag.
(3) After opening the moisture-proof bag, the devices should be assembled within two weeks in an
environment of 5 to 30 and RH70% or below. Perform reflow at most twice.
(4) The moisture-proof bag may be stored unopened for up to 24 months at 5 to 30 and RH90% or below.
(5) If, upon opening the bag, the moisture indicator card shows humidity of 30% or above (the color of the
30% dot has changed from blue to pink) or the expiration date has passed, the devices should be baked as
follows:
Baking conditions: 125 for 48 hours.
Note: Since the tape materials are not heat-proof, devices should be placed on either heat-proof trays or aluminum
magazines when baking.
The humidity indicator shows an approximate ambient humidity at 25.
If the ambient humidity is below 30%, the color of all the indicator dots is blue.
If, upon opening the bag, the color of the 30% dot has changed from blue to pink, the
devices should be baked before assembly.
Fig. 8.1.1 Humidity Indicator
5 2012-01-13
Rev.1.0
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet TJ150F06M3L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TJ150F06M3L | MOSFETs | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |