|
|
PDF OX-080 Data sheet ( Hoja de datos )
| Número de pieza | OX-080 | |
| Descripción | Low g-Sensitivity Oven Controlled Crystal Oscillator | |
| Fabricantes | Vectron International | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OX-080 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
OX-080
Low g-Sensitivity
Oven Controlled Crystal Oscillator
OX-080
Features
• Ultra Low g-Sensitivity
• Low Phase Noise
• High Stability
• Frequency Range: 8 MHZ to 15 MHZ
• Standard Frequency 10 MHz
• Vibration Compensation
Applications
• Military Avionics
• Airborne Radar
• Test Equipment
• Frequency Synthesizers
• Position Location
• Satellite Communications
Performance Specifications
Parameter
Frequency Range
Min Typ Max Units
Available Frequencies
8 15 MHz
Condition
G-Sensitivity Performance
Standard crystal
1 ppb/g
G Sensitivity w\ Low g-Crystal
0.2 ppb/g
G Sensitivity w\ Low g-Crystal & Vibration
compensation
(No mechanical resonances out to 2KHz)
0.02 ppb/g
Degrades to 0.2 ppb/g above 250 Hz
G sensitivity specified per axis
For oscillators with 0.1 ppb/g out to 2 KHz contact factory.
Frequency Stabilities1
(Stabilities listed for 10 MHz. For Stabilities above 10 MHz values may degrade. Please contact factory.)
vs. Operating Temperature Range
(referenced to +25°C)
-30
-20
-10
-5
+30 ppb
+20 ppb
+10 ppb
+5 ppb
-40… +85°C
-40… +70°C
-20… +70°C
0… +70°C
Initial Tolerance
vs. Supply Voltage Change
vs. Load Change
vs. Aging / Daily
vs. Aging / 1st Year
vs. Aging / Year (following years)
-50
-2.0
-2.0
-0.5
-40
-30
+50 ppb
+2.0 ppb
+2.0 ppb
+0.5 ppb
+40 ppb
+30 ppb
at time of shipment, nominal EFC
Vs ± 5%
Load ± 5%
after 72 hours of operation
after 72 hours of operation
Retrace2
-20 +20 ppb
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
1 page  
Ordering Information4
OX - 080 0 - A E T-509 0 - 10M0000000
Product Family
OX: OCXO
Package
38x38 mm
Mounting Style
0: Type A
Supply Voltage
B: 12 Vdc
RF Output Code
E: Sinewave
Frequency
Platform Code
Low G, Compensation option, Phase noise
0: Standard Crystal
1: Low G Crystal
3: Low G-Crystal, w\vibe comp
Temperature Range / Stability Code
E-308: -40°C to +85°C, ±30 ppb
D-208: -40°C to +70°C, ±20 ppb
J-108: -20°C to +70°C, ±10 ppb
T-509: 0°C to +70°C, ±5 ppb
Additional Ordering Options
Additional ordering options available include custom temperature ranges, custom temperature stabilities, custom phase noise
requirements, custom height, custom supply voltage, and improved g-sensitvity. These modifications require a custom dash
number - please contact the factory for additional information.
Design Tools
Vectron stocks the following items for small orders and prototype development:
OX-0800-BEE-3083-10M000000
Vectron stocks the following evaluation board for this product:
None
Application Notes:
None
Notes:
1. Unless otherwise stated, all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, and temperature (25°C).
2. Retrace is defined as the frequency difference between the end of two 24 hour on power periods with a 24 hour off period in
between while at a constant temperature.
3. Phase noise degrades with increasing output frequency.
4. Not all options and codes avaialble at all frequencies.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road, Suite 102
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Asia:
Vectron International
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: +86 21 6194 6699
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 2/18/2014 jar
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet OX-080.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OX-080 | Low g-Sensitivity Oven Controlled Crystal Oscillator | Vectron International |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |