|
|
Número de pieza | V260B3-L05 | |
Descripción | TFT LCD Module | |
Fabricantes | CMI MEI | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de V260B3-L05 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Issued Date: 16, Dec. 2009
Model No.: V260B3 – L05
Approval
TFT LCD Approval Specification
MODEL NO.: V260B3 – L05
Customer:
Approved by:
Note:
Approved By
TV Head Division
C C Chung
Reviewed By
QA Dept.
Hsin-Nan Chen
Product Development Div.
WT Lin
LCD TV Marketing and Product Management Div.
Prepared By
Josh Chi
Jim Ho
1
Version 2.0
1 page Issued Date: 16, Dec. 2009
Model No.: V260B3 – L05
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
VNOP
Value
Min. Max.
-20 +60
0 +50
- 50
- 1.0
Note (1) Temperature and relative humidity range is shown in the figure below.
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
(a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature of
display area from being over 65 ºC. The range of operating temperature may degrade in case of improper
thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10 Storage Range
-40 -20
0 20 40 60 80
Temperature (ºC)
5
Version 2.0
5 Page Issued Date: 16, Dec. 2009
Model No.: V260B3 – L05
Approval
Note (2) The power sequence and control signal timing are shown in the following figure. For a certain
reason, the inverter has a possibility to be damaged with wrong power sequence and control
signal timing.
Note (3) While system is turned ON or OFF, the power sequences must follow as below descriptions:
Turn ON sequence: VBL → PWM signal → BLON
Turn OFF sequence: BLOFF → PWM signal → VBL
Err
TER-R
TER-F
Open Collector
0
0.8V
VBL
0
VBLON
0
Tr1
Ton
0.9VBL
0.1VBL
2.4V
0.8V
Backlight on duration
Tr Tf
Tf1
Ton1
VEPWM
0
VIPWM
0
TOFF
2.4V
0.8V
Ext. Dimming Function
TPWMR
3.15V
TPWMON
Floating
TPWMOFF
TPWMF
Floating
Int. Dimming
Function
VW
External
PWM
Period
External
PWM Duty
11
Version 2.0
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet V260B3-L05.PDF ] |
Número de pieza | Descripción | Fabricantes |
V260B3-L01 | TFT LCD Module | CHI MEI |
V260B3-L02 | TFT LCD Module | CMI MEI |
V260B3-L03 | TFT LCD Module | CHI MEI |
V260B3-L04 | TFT LCD Module | CHI MEI |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |