|
|
PDF ICR18650-24A Data sheet ( Hoja de datos )
| Número de pieza | ICR18650-24A | |
| Descripción | Lithium-ion Rechargeable Cell | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
1. ICR18650-24A pdf datasheet  Hay una vista previa y un enlace de descarga de ICR18650-24A (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
-SAMSUNG SDI Confidential Proprietary –
Spec. No. ICR18650-24A Version No.
1.0
for Lithium-ion Rechargeable Cell
Model : ICR18650-24A
Februray, 2003
Samsung SDI Co.,Ltd.
Mobile Energy Business Team
1
1 page  
Spec. No.
-SAMSUNG SDI Confidential Proprietary –
ICR18650-22 Version No.
1.0
7.8 Cycle Life
Each cycle is an interval between the charge (charge current 1200mA) with 2.5h or
0.05C cut-off and the discharge (discharge current 1200mA) with 2.75V cut-off.
Capacity after 299cycles and plus 1 day, measured under the same condition
in 7.2
Capacity 1631mAh(70% of the capacity at 25 )
7.9 Storage Characteristics
Capacity after storage for 30days at 25 from the standard charge,
measured with discharge current 1200mA with 2.75V cut-off at 25 .
Capacity retention(after the storage) 1864mAh (80% of the capacity at 25 )
7.10 Status of the cell as of ex-factory
The cell should be shipped in 50% charged state. In this case, OCV is from 3.65V to
3.85V.
8. Mechanical Characteristics
8.1 Drop Test
Test method: Cell(as of shipment or full charged) drop onto the oak-board
(thickness: 30mm) from 1.5m height at a random direction 6 times.
Criteria: No leakage
8.2 Vibration Test
Test method: Cell(as of shipment) is vibrated along 2 mutually
perpendicular axes with total excursion of 1.6mm and with
frequency cycling between 10Hz and 55Hz by 1Hz/min.
Criteria: No leakage
9. Safety
9.1 Overcharge Test
Test method: To charge the standard charged cell with 12V and 2.4A at 25
for 2.5 hours.
Criteria: No fire, and no explosion.
9.2 External Short-circuit Test
Test method: To short-circuit the standard charged cell by connecting positive and
negative terminal by less than 50m wire for 3hours.
Criteria: No fire, and no explosion.
9.3 Reverse Charge Test
Test method: To charge the standard charged cell with charge current 2.4A
By –12V for 2.5 hours.
Criteria: No fire, and no explosion.
5
5 Page 
-SAMSUNG SDI Confidential Proprietary –
Spec. No. ICR18650-22 Version No.
1.0
wire or leads to soldered lead.
6.1.2 Otherwise, it may cause damage of component, such as separator and
insulator, by heat generation.
6.2 Positioning the battery in the System
6.2.1 The battery should be positioned as possible as far from heat sources
and high temperature components.
6.2.2 Otherwise, it may cause loss of characteristics.
6.3 Mechanical shock protection of the battery
6.3.1 The battery should equip with appropriate shock absorbers in order to
minimize shock.
6.3.2 Otherwise, it may cause shape distortion, leakage, heat generation
and/or rupture.
6.4 Short-circuit protection of the cell
6.4.1 The cell equips with an insulating sleeve to protect short-circuit which
may occur during transportation, battery assembly and /or system
operation.
6.4.2 If the cell sleeve is damaged by some cause such as outside impact,
it may cause short-circuit with some wiring inside the battery.
6.5 Connection between the battery and charger/system
6.5.1 The battery should be designed to be connected only to the specified
charger and system.
6.5.2 A reverse connection of the battery, even in the specified system,
should be avoided by employing special battery design such as
a special terminals.
7. Battery Pack Assembly
7.1 Prohibition of usage of damaged cell
7.1.1 The cell should be inspected visually before battery assembly.
7.1.2 The cell should not be used if sleeve-damage, can-distorsion and/or
electrolyte-smell is detected.
7.2 Terminals handling
7.2.1 Excessive force on the negative terminal should be avoided when
external lead is welled.
7.3 Transportation
7.3.1 If the cell is necessary to transported to order place, such as the
battery manufacturer, careful precautions should be taken to avoid
damage of cell.
8. Others
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet ICR18650-24A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ICR18650-24A | Lithium-ion Rechargeable Cell | Samsung |
| ICR18650-24E | Lithium-ion Rechargeable Cell | Samsung |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |