DataSheet.es    


PDF NCS20074 Data sheet ( Hoja de datos )

Número de pieza NCS20074
Descripción 3 MHz BW Operational Amplifier
Fabricantes ON Semiconductor 
Logotipo ON Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de NCS20074 (archivo pdf) en la parte inferior de esta página.


Total 24 Páginas

No Preview Available ! NCS20074 Hoja de datos, Descripción, Manual

NCS20071, NCS20072,
NCS20074
Rail-to-Rail Output, 3 MHz
BW Operational Amplifier
The NCS2007 series operational amplifiers provide railtorail
output operation, 3 MHz bandwidth, and are available in single, dual,
and quad configurations. Railtorail operation enables the user to
make optimal use of the entire supply voltage range while taking
advantage of 3 MHz bandwidth. The NCS2007 can operate on supply
voltages as low as 2.7 V over the temperature range of 40°C to
125°C. At a 2.7 V supply, the high bandwidth provides a slew rate of
2.1 V/ms while only consuming 405 mA of quiescent current per
channel. The wide supply range allows the NCS2007 to run on supply
voltages as high as 36 V, making it ideal for a broad range of
applications. Since this is a CMOS device, high input impedance and
low bias currents make it ideal for interfacing to a wide variety of
signal sensors. The NCS2007 devices are available in a variety of
compact packages.
Features
RailToRail Output
Wide Supply Range: 2.7 V to 36 V
Wide Bandwidth: 3 MHz typical at VS = 2.7 V
High Slew Rate: 2.8 V/ms typical at VS = 2.7 V
Low Supply Current: 405 mA per channel at VS = 2.7 V
Low Input Bias Current: 5 pA typical
Wide Temperature Range: 40°C to 125°C
Available in a variety of packages
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AECQ100
Qualified and PPAP Capable
These Devices are PbFree, Halogen Free/BFR Free and are RoHS
Compliant
Applications
Current Sensing
Signal Conditioning
Automotive
End Products
Notebook Computers
Portable Instruments
Power Supplies
http://onsemi.com
SOT553
CASE 463B
5
1
TSOP5
CASE 483
Micro8]
CASE 846AH
TSSOP8
CASE 948S
8
1
SOIC8
CASE 751
8
1
UDFN8
CASE 517AC
14
1
TSSOP14
CASE 948G
14
1
SOIC14 NB
CASE 751A
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 2 of this data sheet.
ORDERING INFORMATION
See detailed ordering and shipping information on page 4 of
this data sheet.
© Semiconductor Components Industries, LLC, 2014
May, 2014 Rev. 0
1
Publication Order Number:
NCS20071/D

1 page




NCS20074 pdf
NCS20071, NCS20072, NCS20074
ABSOLUTE MAXIMUM RATINGS (Note 1)
Rating
Symbol
Limit
Unit
Supply Voltage (VDD – VSS) (Note 2)
Input Voltage
Differential Input Voltage
Maximum Input Current
Maximum Output Current
Continuous Total Power Dissipation (Note 2)
Maximum Junction Temperature
Storage Temperature Range
Mounting Temperature (Infrared or Convection – 20 sec)
ESD Capability (Note 3)
Human Body Model
Machine Model
Charged Device Model
LatchUp Current (Note 3)
Moisture Sensitivity Level (Note 3)
VS
VI
VID
II
IO
PD
TJ
TSTG
Tmount
ESDHBM
ESDMM
ESDCDM
ILU
MSL
40
VSS 0.2 to VDD + 0.2
±Vs
±10
±100
200
150
65 to 150
260
2000
150
1000 (C6)
100
Level 1
V
V
V
mA
mA
mW
°C
°C
°C
V
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
2. Continuous short circuit operation to ground at elevated ambient temperature can result in exceeding the maximum allowed junction
temperature of 150°C. Output currents in excess of the maximum output current rating over the long term may adversely affect reliability.
Shorting output to either VDD or VSS will adversely affect reliability.
3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per ANSI/ANSI/ESDA/JEDEC JS-0012010 (AECQ100002)
ESD Machine Model tested per JESD22A115 (AECQ100003)
ESD Charged Device Model tested per ANSI/ESD S5.3.12009 (AECQ100011)
4. Latchup Current tested per JEDEC standard: JESD78 (AECQ100004)
5. Moisture Sensitivity Level tested per IPC/JEDEC standard: JSTD020A
THERMAL INFORMATION
Parameter
JunctiontoAmbient
Symbol
qJA
Package
SOT235/ TSOP5
SOT5535
Micro8/MSOP8
SOIC8
TSSOP8
UDFN8
SOIC14
TSSOP14
Value
235
250
238
190
140
350
156
190
Unit
°C/W
OPERATING RANGES
Parameter
Symbol
Min
Max Unit
Operating Supply Voltage
VS 2.7
36 V
Differential Input Voltage
VID VS V
Input Common Mode Range
VICM
VSS
VDD 1.35
V
Ambient Temperature
TA 40 125 °C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
http://onsemi.com
5

5 Page





NCS20074 arduino
NCS20071, NCS20072, NCS20074
ELECTRICAL CHARACTERISTICS AT VS = 36 V
TA = 25°C; RL 10 kW; VCM = VOUT = midsupply unless otherwise noted. All limits are guaranteed by testing or statistical analysis.
Boldface limits apply over the specified temperature range, TA = 40°C to 125°C. (Notes 12, 13)
Parameter
Symbol
Conditions
Min Typ Max Unit
SUPPLY CHARACTERISTICS
Power Supply Rejection Ratio
PSRR
No Load
114 135
100
dB
Power Supply Quiescent Current
IDD
Per channel, no load
465 600
700
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
12. Refer to ABSOLUTE MAXIMUM RATINGS and APPLICATION INFORMATION for Safe Operating Area.
13. Performance guaranteed over the indicated operating temperature range by design and/or characterization.
http://onsemi.com
11

11 Page







PáginasTotal 24 Páginas
PDF Descargar[ Datasheet NCS20074.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
NCS200713 MHz BW Operational AmplifierON Semiconductor
ON Semiconductor
NCS200723 MHz BW Operational AmplifierON Semiconductor
ON Semiconductor
NCS200743 MHz BW Operational AmplifierON Semiconductor
ON Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar