|
|
Número de pieza | MA5532-AE | |
Descripción | RFID Transponder Coil | |
Fabricantes | Coilcraft | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MA5532-AE (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Document 1029-1
RFID Transponder Coil – MA5532-AE
• Developed for austriamicrosystems AS3935 Franklin
Lightning Sensor IC
• Designed for antenna applications at 500 kHz to 2 MHz.
• Wound on plastic base for great durability and excellent
mechanical shock resistance.
• 125°C operating temperature range
Terminations Gold over nickel over phos bronze.
Environmental RoHS compliant, halogen free
Weight 320 mg
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Temperature coefficient of inductance +50 to +210 ppm/°C
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2500 per 13″ reel Plastic tape: 24 mm wide,
0.35 mm thick, 8 mm pocket spacing, 2.75 mm pocket depth
PCB washing Only pure water or alcohol recommended
Inductance2
at 2 MHz DCR max3 SRF typ4
Part number1 ±2% (µH) Q min2 (Ohms) (MHz)
MA5532-AE_ 100 30 6.0 34
1. When ordering, please specify packaging code:
MA5532-AED
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (2500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance and Q measured using Agilent/HP 4287A iLCR meter
or equivalent at 2 MHz. For recommended test procedures, contact
Coilcraft.
3. DCR measured on micro-ohmmeter.
4. SRF measured using Agilent/HP 8753D network analyzer.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.138
3,50
max
0.461
11,70
max
XXX
0.102
2,60
max
0.126
3,2
0.337
8,55
0.315
8,0
Recommended
Land Pattern
0.03
0,76
0.051
1,3
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1029-1 Revised 05/16/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet MA5532-AE.PDF ] |
Número de pieza | Descripción | Fabricantes |
MA5532-AE | RFID Transponder Coil | Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |