DataSheet.es    

PDF XPCROY-L1-0000-00803 Datasheet ( Hoja de datos )

Número de pieza XPCROY-L1-0000-00803
Descripción LEDs
Fabricantes Cree 
Logotipo Cree Logotipo

Total 30 Páginas
		
XPCROY-L1-0000-00803 Hoja de datos, Descripción, Manual
BINNING & LABELING
Cree® XLamp® XP Family LEDs
TABLE OF CONTENTS
Introduction................................................................... 2
Bin and Order Code Format.............................................. 3
Performance Groups – Brightness..................................... 5
Performance Groups – Radiant Flux................................... 6
Performance Groups – Chromaticity.................................. 7
Performance Groups – Dominant Wavelength................... 12
Performance Groups – Forward Voltage........................... 12
Cree’s Standard Chromaticity Regions Plotted on the 1931
CIE Curve.................................................................... 13
Cree’s Standard Cool White Kits Plotted on ANSI
Standard Chromaticity Regions....................................... 15
Cree’s Outdoor White Kits Plotted on ANSI
Standard Chromaticity Regions....................................... 16
Cree’s Standard Warm and Neutral White Kits Plotted on
ANSI Standard Chromaticity Regions............................... 18
Cree’s 2200 K CCT White Kits Plotted on ANSI
Standard Chromaticity Regions....................................... 20
Cree’s PC Amber Kit Plotted on the 1931 CIE Curve........... 20
Cree’s Standard Chromaticity Kits................................... 21
Standard Order Codes and Pre-ANSI Bins
XP-C Cool White........................................................ 22
Standard Order Codes and Bins
XP-C ANSI Cool White................................................ 22
XP-C Neutral White.................................................... 23
XP-C Warm White...................................................... 24
XP-C Color................................................................ 24
XP-E Cool White........................................................ 26
XP-E ANSI Cool White................................................ 26
XP-E Neutral White, Outdoor White.............................. 27
XP-E Warm White...................................................... 28
XP-E Color................................................................ 29
XP-E2 ANSI Cool White.............................................. 31
XP-E2 Neutral White, Outdoor White............................ 31
XP-E2 Warm White.................................................... 33
XP-E2 Color.............................................................. 34
XP-E2 Warm White.................................................... 34
XP-E HEW ANSI Cool White......................................... 37
XP-E HEW Neutral White, Outdoor White...................... 38
XP-G ANSI Cool White................................................ 40
XP-G Neutral White, Outdoor White............................. 41
XP-G Warm White...................................................... 43
XP-G2 ANSI Cool White.............................................. 45
XP-G2 Neutral White, Outdoor White............................ 46
XP-G2 Warm White.................................................... 48
XP-L ANSI Cool White................................................ 50
XP-L Neutral White.................................................... 51
XP-L Warm White...................................................... 52
Copyright © 2008-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®,
the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is
not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp

1 page

XPCROY-L1-0000-00803 pdf
XLAMP® XP LED BINNING & LABELING
PERFORMANCE GROUPS – BRIGHTNESS
XLamp XP Family LEDs (except royal blue and XP-L) are tested for luminous flux and placed into one of the following
luminous‑flux groups:
Group Code
J
K2
K3
M2
M3
N2
N3
N4
P2
P3
P4
Q2
Q3
Q4
Q5
R2
R3
R4
R5
S2
S3
Min. Luminous Flux
@ 350 mA (lm)
23.5
30.6
35.2
39.8
45.7
51.7
56.8
62.0
67.2
73.9
80.6
87.4
93.9
100
107
114
122
130
139
148
156
Max. Luminous Flux
@ 350 mA (lm)
30.6
35.2
39.8
45.7
51.7
56.8
62.0
67.2
73.9
80.6
87.4
93.9
100
107
114
122
130
139
148
156
164
XLamp XP-L LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups:
Group Code
T5
T6
U2
U3
U4
U5
U6
V2
V3
V4
V5
V6
Min. Luminous Flux
@ 1050 mA (lm)
260
280
300
320
340
360
380
400
420
440
460
480
Max. Luminous Flux
@ 1050 mA (lm)
280
300
320
340
360
380
400
420
440
460
480
500
Copyright © 2008-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
5

5 Page

XPCROY-L1-0000-00803 arduino
XLAMP® XP LED BINNING & LABELING
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
Region
AC1
AD1
x
0.5066
0.5131
0.5192
0.5126
0.4936
0.5001
0.5059
0.4993
y
0.4158
0.4252
0.4250
0.4156
0.3970
0.4064
0.4062
0.3969
Region
AC2
AD2
x
0.5131
0.5196
0.5258
0.5192
0.5001
0.5066
0.5126
0.5059
y
0.4252
0.4346
0.4343
0.4250
0.4064
0.4158
0.4156
0.4062
Region
AC3
AD3
x
0.5192
0.5258
0.5321
0.5253
0.5059
0.5126
0.5186
0.5118
y
0.4250
0.4343
0.4341
0.4248
0.4062
0.4156
0.4154
0.4061
Region
AC4
AD4
x
0.5126
0.5192
0.5253
0.5186
0.4993
0.5059
0.5118
0.5050
y
0.4156
0.4250
0.4248
0.4154
0.3969
0.4062
0.4061
0.3967
XLamp XP-E2 PC amber LEDs are placed into the region defined by the following bounding coordinates.
Region
Y2
x
0.5469
0.5700
0.5900
0.5610
y
0.4249
0.4100
0.4100
0.4390
Copyright © 2008-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets
available at www.cree.com.
11

11 Page


PáginasTotal 30 Páginas
PDF Descargar[ XPCROY-L1-0000-00803.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
XPCROY-L1-0000-00801LEDsCree
Cree
XPCROY-L1-0000-00802LEDsCree
Cree
XPCROY-L1-0000-00803LEDsCree
Cree

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar