|
|
PDF DS26LS32M Data sheet ( Hoja de datos )
| Número de pieza | DS26LS32M | |
| Descripción | Quad Differential Line Receivers | |
| Fabricantes | National Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DS26LS32M (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
May 1999
DS26LS32AC/DS26LS32C/DS26LS32M/DS26LS33M
Quad Differential Line Receivers
General Description
The DS26LS32 and DS26LS32A are quad differential line
receivers designed to meet the RS-422, RS-423 and Federal
Standards 1020 and 1030 for balanced and unbalanced
digital data transmission.
The DS26LS32 and DS26LS32A have an input sensitivity of
200 mV over the input voltage range of ±7V and the
DS26LS33 have an input sensitivity of 500 mV over the input
voltage range of ±15V.
The DS26LS32A differ in function from the popular
DS26LS32 and DS26LS33 in that input pull-up and pull-
down resistors are included which prevent output oscillation
on unused channels.
Each version provides an enable and disable function com-
mon to all four receivers and features TRI-STATE ® outputs
with 8 mA sink capability. Constructed using low power
Schottky processing, these devices are available over the
full military and commerical operating temperature ranges.
Features
n High differential or common-mode input voltage ranges
of ±7V on the DS26LS32 and DS26LS32A and ±15V
on the DS26LS33
n ±0.2V sensitivity over the input voltage range on the
DS26LS32 and DS26LS32A, ±0.5V sensitivity on the
DS26LS33
n DS26LS32 and DS26LS32A meet all requirements of
RS-422 and RS-423
n 6k minimum input impedance
n 100 mV input hysteresis on the DS26LS32 and
DS26LS32A, 200 mV on the DS26LS33
n Operation from a single 5V supply
n TRI-STATE outputs, with choice of complementary
output enables for receiving directly onto a data bus
Logic Diagram
00525501
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 2004 National Semiconductor Corporation DS005255
www.national.com
http://www.Datasheet4U.com
1 page  
Typical Applications
Two-Wire Balanced Interface — RS-422
Single Wire with Driver Ground Reference — RS-423
00525506
00525507
5 www.national.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet DS26LS32M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DS26LS32 | Quad Differential Line Receivers | National Semiconductor |
| DS26LS32AC | Quad Differential Line Receivers | National Semiconductor |
| DS26LS32AC | DS26LS32AC/DS26LS32C/DS26LS32M/DS26LS33M Quad Differential Line Receivers (Rev. C) |  Texas Instruments |
| DS26LS32ACM | Quad Differential Line Receivers | National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |