|
|
PDF KDC-MP243SW Data sheet ( Hoja de datos )
| Número de pieza | KDC-MP243SW | |
| Descripción | CD Receiver Manual | |
| Fabricantes | Kenwood | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KDC-MP243SW (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
CD-RECEIVER
KDC-MP443
KDC-MP3043
KDC-MP343
KDC-MP243
KDC-MP243SW
INSTRUCTION MANUAL
© B64-4213-00/00 (MW/M0)
http://www.Datasheet4U.com
1 page  
Tuner functions
FM Band : [FM+]
Switches between FM1, FM2, and FM3 each time the
[FM+] button is pressed.
AM Band: [AM–]
Switches to AM.
Switches between MW, SW1, and SW2 each time the
[AM–] button is pressed. (KDC-MP243SW only)
Tuning: [4]/[¢]
Changes the frequency.
⁄
• During reception of stereo stations the “ST” indicator is ON.
Auto memory entry: [FM+]
Memorizes 6 stations with good reception
automatically when pressed for at least 2 seconds.
Preset memory: [1] - [6]
Memorize the station selected when pressing for at
least 2 seconds.
Preset tuning: [1] - [6]
Recalls the memorized station.
Disc play functions
Disc play: Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the “IN” indicator is ON.
⁄
• 3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
• Refer to <About Audio file> (page 14) for the Audio file by
models you can play.
Pause and play: [6]
Switches between pause and play each time this
button is pressed.
Disc ejection: [0]
⁄
• You can eject the disc for 10 minutes after switching off the
engine.
Music search: [4]/[¢]
Changes the music when this button is pressed.
Fast reverses or forwards the music while pressing.
Folder/Disc search: [FM+]/[AM–]
Switches the folder containing the audio file or the
disc in the disc changer.
Track/ File/ Disc/ Folder repeat play: [4]
Switches between Track Repeat (“TRAC REP”), Disc
Repeat (“DISC REP”) (In Disc Changer), and OFF (“REP
OFF”) when pressed while playing a CD.
Switches between File Repeat (“FILE REP”), Folder Re-
peat (“FOLD REP”), and OFF (“REP OFF”) when pressed
while playing an audio file.
Scan play: [2]
Successively plays the intro of the music in the disc or
folder.
“TRAC SCN”/ “FILE SCN” is displayed during Scan Play.
Random play: [3]
Randomly plays the music in the disc or folder.
“DISC RDM”/ “FOLD RDM” is displayed during Random
Play.
Magazine random play (KDC-MP443): [5]
Randomly plays the music in the disc changer.
“MGZN RDM” is displayed during Magazine Random
Play.
Text/Title scroll: [DISP]
Scrolls the CD and audio file text display when
pressing the top side for at least 1 second.
English | 5
5 Page 
⁄
• If you enter the wrong Code in steps 4 through 6, repeat
from step 4.
9 Exit Security Code mode
Press the Search button.
Resetting the Security Code function when the
audio unit is first used after removed from the
battery power source or the Reset button is
pressed
1 Turn the power ON.
2 Do the step 4 through 7 operation, and enter
the Security Code.
“APPROVED” is displayed.
Now, you can use the unit.
⁄
• When the Security Code function is activated, “CODE
SET” changes to “CODE CLR”.
• To deactivate the Security Code function, see the next
section <Deactivating Security Code>.
Function of KDC-MP443
Deactivating Security Code
To deactivate the Security Code function.
1 Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
3 Select Security Code mode
Press the [FM+] or [AM–] button.
Select the “CODE CLR” display.
4 Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE CLR” is also
displayed.
5 Select the digits to enter
Press the [4] or [¢] button.
6 Select the Security Code numbers
Press the [FM+] or [AM–] button.
7 Repeat steps 4 and 5, and complete the
Security Code.
8 Press the [AUD] knob for at least 3 seconds.
“CLEAR” is displayed.
The Security Code function deactivates.
9 Exit Security Code mode
Press the Search button.
⁄
• If a wrong security code is entered, “ERROR” is displayed.
Enter a correct security code.
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary
input source.
1 Select Auxiliary input source
Press the [SRC] button.
Select the “AUX” display.
2 Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
3 Select Auxiliary input display setting mode
Press the [FM+] or [AM–] button.
Select the “NAME SET” display.
4 Enter Auxiliary input display setting mode
Press the [AUD] knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
5 Select the Auxiliary input display
Press the [4] or [¢] button.
Each time you push the knob, the display alternates
as listed below.
• “AUX”
• “DVD”
• “PORTABLE”
• “GAME”
• “VIDEO”
• “TV”
6 Exit Auxiliary input display setting mode
Press the Search button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is
displayed by default.
English | 11
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet KDC-MP243SW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KDC-MP243SW | CD Receiver Manual | Kenwood |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |