|
|
PDF KS3A Data sheet ( Hoja de datos )
| Número de pieza | KS3A | |
| Descripción | COLOR TELEVISION RECEIVER MANUAL | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KS3A (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
COLOR TELEVISION RECEIVER
Chassis :
Model :
RTV servis Horvat
Tel: ++385-31-856-637
Tel/fax: ++385-31-856-139
Mob: 098-788-319
www.rtv-horvat-dj.hr
KS3A(P) (REV. 2)
CS29A5HT8X/BWT
CS29A5HT8X/NWT
CS29A5HT8X/VWT
CZ21A8VW8X/ELS
COLOR TELEVISION RECEIVER
CONTENTS
1. Precautions
2. Reference Information
3. Specifications
4. Alignment and Adjustments
5. Troubleshooting
6. Exploded Views and Parts List
7. Electrical Parts List
8. Block Diagrams
9. Wiring Diagram
10. Schematic Diagrams
www.rtv-horvat-dj.hr
Free Datasheet http://www.Datasheet4U.com
1 page  
Precautions
1-3 Precautions for Electrostatically Sensitive Devices (ESDs)
1. Some semiconductor (“solid state”) devices
are easily damaged by static electricity. Such
components are called Electrostatically
Sensitive Devices (ESDs); examples include
integrated circuits and some field-effect
transistors. The following techniques will
reduce the occurrence of component damage
caused by static electricity.
2. Immediately before handling any semicon
ductor components or assemblies, drain the
electrostatic charge from your body by
touching a known earth ground. Alternatively,
wear a discharging wrist-strap device. (Be
sure to remove it prior to applying power—
this is an electric shock precaution.)
3. After removing an ESD-equipped assembly,
place it on a conductive surface such as
aluminum foil to prevent accumulation of
electrostatic charge.
4. Do not use freon-propelled chemicals. These
can generate electrical charges that damage
ESDs.
5. Use only a grounded-tip soldering iron when
soldering or unsoldering ESDs.
6. Use only an anti-static solder removal device.
Many solder removal devices are not rated as
“anti-static”; these can accumulate sufficient
electrical charge to damage ESDs.
7. Do not remove a replacement ESD from its
protective package until you are ready to
install it. Most replacement ESDs are
packaged with leads that are electrically
shorted together by conductive foam,
aluminum foil or other conductive materials.
8. Immediately before removing the protective
material from the leads of a replacement ESD,
touch the protective material to the chassis or
circuit assembly into which the device will be
installed.
9. Minimize body motions when handling
unpackaged replacement ESDs. Motions such
as brushing clothes together, or lifting a foot
from a carpeted floor can generate enough
static electricity to damage an ESD.
1-4
www.rtv-horvat-dj.hr
Samsung Electronics
Free Datasheet http://www.Datasheet4U.com
5 Page 
Reference Information
Table 2-3-6 TRANS
SPEC
FUJ-29B001
FUH-29A001B
29”
21”
Table 2-3-7 TRANS FLYBACK (FBT)
SPEC
AA26-00046A
AA26-00044C
29”
21”
FUNCTION
FUNCTION
REMARK
REMARK
2-6
www.rtv-horvat-dj.hr
Samsung Electronics
Free Datasheet http://www.Datasheet4U.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet KS3A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KS322A5B125C3000-1800 | Diode ( Rectifier ) |  American Microsemiconductor |
| KS322A5B250C3000-1800 | Diode ( Rectifier ) | American Microsemiconductor |
| KS322A5B500C3000-1800 | Diode ( Rectifier ) | American Microsemiconductor |
| KS324520 | Single Darlington Transistor Module |  Powerex Power Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |