DataSheet.es    


PDF VSX-40 Data sheet ( Hoja de datos )

Número de pieza VSX-40
Descripción Audio/Video Multi-Channel Receiver
Fabricantes Pioneer 
Logotipo Pioneer Logotipo



Hay una vista previa y un enlace de descarga de VSX-40 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! VSX-40 Hoja de datos, Descripción, Manual

AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-40
Register your product on
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
• Protect your new investment
The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.
• Receive free tips, updates and service bulletins on your new product
• Improve product development
Your input helps us continue to design products that meet your needs.
• Receive a free Pioneer newsletter
Registered customers can opt in to receive a monthly newsletter.
Operating Instructions

1 page




VSX-40 pdf
Before you start
Checking what’s in the box
Please check that you’ve received the following supplied
accessories:
• Setup microphone
• Remote control
• AAA size IEC R03 dry cell batteries (to confirm system
operation) x2
• AM loop antenna
• FM wire antenna
• iPod cable
• These operating instructions
Installing the receiver
• When installing this unit, make sure to put it on a level
and stable surface.
Don’t install it on the following places:
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device that gives off a
magnetic field). This may interfere with the sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is vibration or other movement
– in places that are very dusty
– in places that have hot fumes or oils (such as a kitchen)
Flow of settings on the
receiver
The unit is a full-fledged AV receiver equipped with an
abundance of functions and terminals. It can be used easily
after following the procedure below to make the connections
and settings.
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
1 Connecting the speakers
Where you place the speakers will have a big effect on the
sound.
• Determining the speakers’ application (page 10)
• Connecting the speakers (page 12)
• Switching the speaker terminal (page 12)
2 Connecting the components
For surround sound, you’ll want to hook up using a digital
connection from the Blu-ray Disc/DVD player to the
receiver.
• About the video converter (page 14)
• Connecting a TV and playback components (page 15)
• Connecting antennas (page 20)
• Plugging in the receiver (page 23)
3 Power On
Make sure you’ve set the video input on your TV to this
receiver. Check the manual that came with the TV if you
don’t know how to do this.
4 The Speaker System setting (page 41)
(Specify either using the surround back or front height
speaker.)
The Input Assign menu (page 40)
(When using connections other than the recommended
connections.)
Using the Audio Return Channel function (page 43)
(When the connected TV supports the HDMI Audio
Return Channel function.)
5 Use the on-screen automatic MCACC setup to set up
your system
• Automatically setting up for surround sound (MCACC)
(page 24)
6 Playing a source (page 26)
• Selecting the audio input signal (page 26)
• Playing an iPod (page 27)
• Playing a USB device (page 28)
• Choosing the listening mode (page 33)
7 Adjusting the sound as desired
• Using the Sound Retriever (page 34)
• Better sound using Phase Control (page 35)
• Listening with Acoustic Calibration EQ (page 34)
• Using surround back channel processing (page 35)
• Setting the Up Mix function (page 35)
• Setting the Audio options (page 36)
• Manual speaker setup (page 38)
8 Making maximum use of the remote control
• Setting the remote to control other components
(page 46)
5
En

5 Page





VSX-40 arduino
Connecting your equipment
- If the surround speakers cannot be set directly to the
side of the listening position with a 7.1-channel system,
the surround effect can be enhanced by turning off the
Up Mix function (see Setting the Up Mix function on
page 35).
• For the best stereo effect, place the front speakers 2 m to
3 m (6 ft. to 9 ft.) apart, at equal distance from the TV.
• If you’re using a center speaker, place the front speakers
at a wider angle. If not, place them at a narrower angle.
• Place the center speaker above or below the TV so that the
sound of the center channel is localized at the TV screen.
Also, make sure the center speaker does not cross the
line formed by the leading edge of the front left and right
speakers.
• Surround and surround back speakers should be
positioned 60 cm to 90 cm (2 ft. to 3 ft.) higher than your
ears and titled slight downward. Make sure the speakers
don’t face each other. For DVD-Audio, the speakers
should be more directly behind the listener than for home
theater playback.
• Try not to place the surround speakers farther away from
the listening position than the front and center speakers.
Doing so can weaken the surround sound effect.
• Place the left and right front height speakers at least one
meter (3.3 ft.) directly above the left and right front
speakers.
• If you’re going to place speakers around your CRT TV, use
shielded speakers or place the speakers at a sufficient
distance from your CRT TV.
• The subwoofer can be placed on the floor. Ideally, the
other speakers should be at about ear-level when you’re
listening to them. Putting the speakers on the floor
(except the subwoofer), or mounting them very high on a
wall is not recommended.
• When not connecting a subwoofer, connect speakers
with low frequency reproduction capabilities to the front
channel. (The subwoofer’s low frequency component is
played from the front speakers, so the speakers could be
damaged.)
After connecting, be sure to conduct the Auto
MCACC (speaker environment setting) procedure.
See Automatically setting up for surround sound (MCACC)
on page 24.
The front height terminals can also be used for Speaker B.
Front height right
Speaker B - right
Front height setting
Speaker B setting
Front height left
Speaker B - left
Front right
Subwoofer
LINE LEVEL
INPUT
Center
Front left
HDMI DVR/BDR IN DVD IN
BD IN VIDEO 1 IN
OUT COAXIAL
IN 1
IN
1
ASSIGNABLE
IN OPTICAL
2 ASSIGNABLE
IR
IN
OUT
12 V
TRIGGER
(OUTPUT
12 V
50 mA
MAX)
VIDEO
AUDIO
DVR/BDR CD-R/TAPE ZONE2
(CD)
(TV/SAT) (CD-R/TAPE)
MONITOR TV/SAT BD
OUT IN
IN OUT
L ADAPTER PORT
(OUTPUT 5 V
OUT 0.1 A MAX)
R ANTENNA
DVR/
BDR
OUT
IN 1
(DVD)
ASSIGN
ABLE
IN 2
(DVR/
BDR)
IN DVD IN IN
IN
CD
L
FM UNBAL
75
IN SIRIUS
AM LOOP
A
R
FRONT
RL
IN
L
IN
CENTER
MONITOR
OUT Y
PB PR
COMPONENT VIDEO
TV/SAT BD
R
DVD
SUBWOOFER
PRE OUT
SURROUND
RL
SURROUND BACK
R L(Single)
SPEAKERS
Class 2 Wiring
FRONT HEIGHT / B
RL
When using only one surround
back speaker, connect it to the
SURROUND BACK L (Single)
terminals.
Surround right
Surround
back right
Surround
back left
Surround left
02
11
En

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet VSX-40.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VSX-40Audio/Video Multi-Channel ReceiverPioneer
Pioneer
VSX-416-K(VSX-416 / VSX-516) Audio/Video Multi-Channel ReceiverPioneer
Pioneer
VSX-416-S(VSX-416 / VSX-516) Audio/Video Multi-Channel ReceiverPioneer
Pioneer
VSX-423-KAV Receiver Operating InstructionsPioneer
Pioneer

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar