|
|
PDF DL850 Data sheet ( Hoja de datos )
| Número de pieza | DL850 | |
| Descripción | ScopeCorder Started Guide | |
| Fabricantes | Yokogawa | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DL850 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
User’s
Manual
DL850/DL850V
ScopeCorder
Getting Started Guide
IM DL850-03EN
2nd Edition
Free Datasheet http://www.Datasheet4U.com
1 page  
Checking the Contents of the Package
Standard Accessories
The standard accessories below are supplied with the instrument. Check that all contents are present
and undamaged.
Power Cord (one of the following power cords
is supplied according to the instrument’s suffix codes)
UL/CSA Standard VDE Standard BS Standard AS Standard GB Standard
A1006WD
A1009WD
A1054WD
A1024WD
A1064WD
D
Front-panel
protection cover
B8074EA
Cover panels
B8073CY,
8 panels
F
Soft case
B8059GG
QR
Printer roll paper1
B9988AE, 1 roll
H
One of the following
panel sheets:
B8074EH (Japanese; -HJ)
B8074EJ (Chinese; -HC)
B8074EK (Korean; -HK)
B8074EL (German; -HG)
B8074EM (French; -HF)
B8074EN (Italian; -HL)
B8074EP (Spanish; -HS)
Rubber stoppers
B9989EX,
4 stoppers
(1 sheet)
One set of manuals
1 Only included with models that have a built-in printer (/B5)
How to Use the CD-ROM (User’s Manuals)
The CD-ROM contains PDF files of the following manuals.
• DL850/DL850V ScopeCorder Features Guide
IM DL850-01EN
• DL850/DL850V ScopeCorder User’s Manual
IM DL850-02EN
• DL850/DL850V ScopeCorder Communication Interface User’s Manual
IM DL850-17EN
To view the above manuals, you need Adobe Reader 5.0 or later.
WARNING
Never play this CD-ROM on an audio CD player. Doing so may cause loss of hearing or
speaker damage due to the large sounds that may be produced.
IM DL850-03EN
iii
Free Datasheet http://www.Datasheet4U.com
5 Page 
Safety Precautions
Precautions to Be Taken When Using the Probes
• When measuring high voltages using the 701250 (HS10M12) or 701251 (HS1M16), use an
isolated probe (the 700929 or 701947), 1:1 safety cable (a combination of the 701901 and
701954), or differential probe (700924).
• Be sure to connect the GND lead of the differential probe (the 700924) to the functional
ground terminal of the DL850/DL850V. High voltage may appear at the BNC connector of
the differential probe. Also, be sure to connect the GND lead to the DL850/DL850V before
you connect to the device under measurement.
• When using the 701255 (NONISO_10M12), be sure to fasten the module screws.
Fastening the module screws activates the protection function and the non-isolation
function. It is extremely dangerous if you do not fasten the screws. Also, when you measure
high voltages above 42 V, be sure to use the passive probe (the 701940).
• The BNC portion of the passive probe (701940) is metal, so if you use it with isolated input
(the 701250 (HS10M12), 701251 (HS1M16), 701260 (HV (with RMS)), etc.), for safety, be
sure to only use it with voltages at or below 42 V.(Do not connect voltage above 42 V to
both the High and Low sides.)
For non-isolated inputs (701255 (NONISO_10M12), etc.), fasten the module screws as
described before.
• When you apply high voltages to the 701260 (HV (with RMS)), use a 1:1 safety cable (a
combination of the 701901 and 701954) or isolated probe (the 700929 or 701947).
• The measurement category of the 701260 (HV (with RMS)) is 400V-CATII on the low side
and 700V-CATII on the high side. Use caution because the overvoltage tolerance differs
between the low and high sides.
Operating Environment Limitations
CAUTION
This product is a Class A (for industrial environments) product. Operation of this product in a
residential area may cause radio interference in which case the user will be required to correct
the interference.
IM DL850-03EN
ix
Free Datasheet http://www.Datasheet4U.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet DL850.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DL850 | ScopeCorder Manual | Yokogawa |
| DL850 | ScopeCorder Started Guide | Yokogawa |
| DL850V | ScopeCorder Manual | Yokogawa |
| DL850V | ScopeCorder Started Guide | Yokogawa |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |