DataSheet.es    


PDF EE-SPX303 Data sheet ( Hoja de datos )

Número de pieza EE-SPX303
Descripción (EE-SPX303 / EE-SPX403) Slot-type Photomicrosensor
Fabricantes Omron 
Logotipo Omron Logotipo



Hay una vista previa y un enlace de descarga de EE-SPX303 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! EE-SPX303 Hoja de datos, Descripción, Manual

Slot-type Photomicrosensor with Cable
EE-SPX303/403
Long sensing distance (13 mm)
without external light interference.
Easy adjustment and optical axis monitoring with a light
indicator.
Connection possible with Programmable Controllers
(PLCs).
Easy-to-wire connector assures ease of maintenance.
Wide operating voltage range: 12 to 24 VDC
Be sure to read Safety Precautions on
page 3.
Ordering Information
Sensors
Appearance
Sensing method
Through-beam type
(with slot)
Sensing distance
(slot width)
Output type
13 mm
(slot width)
NPN output
Output
configuration
Dark-ON
Light-ON
Accessories (Order Separately)
Connector
Type
Cable length
Connector with
Cable
Connector with
Robot Cable
NPN/PNP Conversion Connector
1m
2m
1m
2m
0.46 m (total length)
Model
EE-1001
EE-1009
EE-1006
EE-1010
EE-1006
EE-1010
EE-1010-R
EE-1010-R
EE-2002
Infrared light
Model
EE-SPX303
EE-SPX403
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
1
Free Datasheet http://www.Datasheet4U.com

1 page




EE-SPX303 pdf
General Precautions
Photomicrosensors Technical Guide
Refer to Safety Precautions for individual models for specific precautions for each model.
WARNING
These products cannot be used in safety devices for
presses or other safety devices used to protect human
life.
This product is designed for use in applications for
sensing workpieces and workers that will not affect
levels of safety.
Precautions for Safe Use
To ensure safety, observe the following precautions.
Wiring
Item
Power Supply
Do not apply any voltage exceed-
ing the operating voltage range.
Applying any excessive voltage or
supplying AC power (100 VAC or
higher) to a DC-type sensor may
cause the Sensor to explode or
burn.
DC 3-Wire NPN Output Sensors
Examples
Brown
Load
Sensor
Black
Blue
Load Short-circuit
Do not short-circuit the load.
Doing so may cause the Sensor to
explode or burn.
DC 3-Wire NPN Output Sensors
(Load short-circuit)
Brown
Load
Sensor
Black
Blue
Wiring
Be sure to wire the Sensor correct-
ly and be careful not to connect the
polarities incorrectly, otherwise the
Sensor may explode or burn.
DC 3-Wire NPN Output Sensors
(Example) Wrong polarity
Brown
Load
Sensor
Black
Blue
DC 3-Wire NPN Output Sensors
(Example) Wrong polarity or wrong wiring
Brown
Sensor
Blue
Load
Black
Brown
Load
Sensor
Blue
Black
Connection with No Load
If connected to the power supply
without any load, internal elements
may explode or burn. Make sure
that a proper load is connected to
the Sensor.
DC 3-Wire NPN Output Sensor
AND Connections
Do not use AND connections such
as in the example shown in the di-
agram here. Voltage will be ap-
plied to the Vcc terminal without
the GND terminal of Sensor 2 be-
ing securely grounded, and may
cause the Sensor to fail.
Depending on the model used, in-
rush current to Sensor 2 when
Sensor 1 is turned ON may cause
product failure.
Sensor 1
Sensor
Brown 12 to 24 VDC
Sensor
Black
Blue
0V
Sensor 2
Brown
(Vcc)
Black
(OUT)
Blue (GND)
Sensor
5 to 24 VDC
Brown
(Vcc) Load
Black (OUT)
Blue (GND) 0V
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
C-1
Free Datasheet http://www.Datasheet4U.com

5 Page





EE-SPX303 arduino
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL
LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR
STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the product.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased product.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent
the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This catalog shall not be copied for sales or promotions without permission.
This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this
catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
2007. 3
In the interest of product improvement, specifications are subject to change without notice.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Free Datasheet http://www.Datasheet4U.com

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet EE-SPX303.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EE-SPX301Slot-type Reflective PhotomicrosensorOmron
Omron
EE-SPX302-W2A(EE-SPXxxx-W2A) Prewired Compact Sensing HeadOmron
Omron
EE-SPX303(EE-SPX303 / EE-SPX403) Slot-type PhotomicrosensorOmron
Omron
EE-SPX304-W2A(EE-SPXxxx-W2A) Prewired Compact Sensing HeadOmron
Omron

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar