|
|
Número de pieza | SF2059B-1 | |
Descripción | SAW Filter | |
Fabricantes | RFM | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SF2059B-1 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! • Low Insertion Loss
• 5.0 x 7.0 mm Surface-Mount Case
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Maximum DC Voltage Between any 2 Terminals
Storage Temperature Range
Maximum Soldering Temperature
Pb
Value
+10
Units
dBm
30 VDC
-40 to +85
°C
265°C for 10 s
SF2059B-1
137.50 MHz
SAW Filter
Electrical Characteristics
Characteristic
Nominal Center Frequency
Minimum Insertion Loss
1 dB Bandwidth
3 dB Bandwidth
Amplitude Ripple, 137.1 to 137.9 MHz
40 dB Bandwidth
Operating Temperature Range
Input and Output Impedance
Case Style
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
SMP-03
Sym
fC
IL
BW1
BW3
TA
Notes
1
1, 2
1
1, 2
1
5
Min Typ Max Units
137.50
MHz
8.3 9.1 dB
0.80 0.86
1.0
MHz
0.85
1.3 dBP-P
7.0 MHz
-40 +85 °C
L-C Match to 50 ohms
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2059B-1 YYWWS##
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. Tape and Reel Standard Per ANSI / EIA 481.
5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port
2, so that the filter must always be installed in one direction per the circuit design.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
8. ©Copyright 2009, RF Monolithics Inc.
www.RFM.com E-mail: [email protected]
©2009 by RF Monolithics, Inc.
Page 1 of 5
SF2059B-1 - 1/16/09
Free Datasheet http://www.datasheetlist.com/
1 page Tape and Reel Specifications
See Detail "A"
“B “
Inches millimeters
7 178
13 330
Quantity Per Reel
500
2000
126..00
2.0
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 5.5 mm
Bo 7.5 mm
Ko 2.0 mm
Pitch
8.0 mm
W 16.0 mm
www.RFM.com E-mail: [email protected]
©2009 by RF Monolithics, Inc.
PIN #1
USER DIRECTION OF FEED
Page 5 of 5
SF2059B-1 - 1/16/09
Free Datasheet http://www.datasheetlist.com/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SF2059B-1.PDF ] |
Número de pieza | Descripción | Fabricantes |
SF2059B-1 | SAW Filter | RFM |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |