|
|
PDF SF1126A Data sheet ( Hoja de datos )
| Número de pieza | SF1126A | |
| Descripción | 127 MHz SAW Filter | |
| Fabricantes | RFM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF1126A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
• Designed for Interactive Video Applications
• Wide Bandwidth and Excellent GD Variation
• 9.1 x 7.1 mm Surface-mount Case
• Single Ended Input and Output
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max. Soldering Profile
Pb
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
1.3 db Passband
Group Delay Variation over fc ±fc12.0 MHz
Phase Linearity over fc±12.0 MHz
Rejection
< 107.0 MHz
> 147.25 MHz
Ultimate
Operating Temperature Range
Frequency Temperature Coefficient
Sym
fC
IL
BW1.3
GDV
TA
FTC
Notes
1
1, 2
1, 2, 3
1
Min
±15.0
40
40
+25
SF1126A
127 MHz
SAW Filter
SM9171-10
Typ
127.000
14
11
40
-94
Max
15.0
30
10
+30
Units
MHz
dB
MHz
nsP-P
°P-P
dB
°C
ppm/°C
Impedance Matching to 50Ω Unbalanced
Case Style
Lid Symbolization (YY = year, WW = week)
External L-C
SM9171-10 9.1 x 7.1 mm Nominal Footprint
RFM SF1126A YYWW
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range
with filter soldered to the specified demonstration board with impedance matching to 50 Ω
and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center
frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband.
Rejection in final user application is dependent on PCB layout and external impedance
matching design. See Application Note No. 42 for details.
4. Part to part absolute delay measurement records the absolute delay mean across 1 dB
passband.
5. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E"
indicates "engineering prototypes."
6. The design, manufacturing process, and specifications of this filter are subject to change.
7. Either Port 1 or Port 2 may be used for either input or output in the design. However,
impedances and impedance matching may vary between Port 1 and Port 2, so that the fil-
ter must always be installed in one direction per the circuit design.
8. US and international patents may apply.
9. Electrostatic Sensitive Device. Observe precautions for handling.
Electrical Connections
Connection
Port 1 Hot (Input)
Port 1 Gnd Return
Port 2 Hot (Output)
Port 2 Gnd Return
Case Ground
Terminals
1
10
6
5
All others
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF1126A-121604
Page 1 of 2
Free Datasheet http://www.datasheetlist.com/
1 page  
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SF1126A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF1126A | 127 MHz SAW Filter | RFM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |