DataSheet.es    


PDF SF1056A Data sheet ( Hoja de datos )

Número de pieza SF1056A
Descripción 110.592 MHz SAW Filter
Fabricantes RFM 
Logotipo RFM Logotipo



Hay una vista previa y un enlace de descarga de SF1056A (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! SF1056A Hoja de datos, Descripción, Manual

®
• Designed for DECT and WLAN IF Applications
• Low Insertion Loss
• Excellent Size-to-Performance Ratio
• Hermetic 13.3 X 6.5 mm Surface-Mount Case
• Unbalanced Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SF1056A
110.592 MHz
SAW Filter
SM13365-12
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
3 dB Passband
Group Delay Variation over fc ±576 kHz
Rejection
fc-3.4 to fc-1.728 and fc+1.728 to fc+3.4 MHz
DC to fc-3.4 and fc+3.4 to 200 MHz
Ultimate
Operating Temperature Range
Sym
fC
IL
BW3
GDV
TA
Impedance Matching to 50 unbalanced
Case Style
Lid Symbolization (YY=year, WW=week) See note 4
Notes
1
1, 2
1, 2, 3
1
Min
±576
28
40
-10
Typ
110.592
8.5
±750
<150
40
>45
45
Max
10.0
200
+60
External L-C
SM13365-12 13.3 X 6.5 mm Nominal Footprint
RFM SF1056A YYWW
Units
MHz
dB
kHz
nsP-P
dB
°C
Electrical Connections
Connection
Port 1Hot
Port 1 Gnd Return
Port 2 Hot
Port 2 Gnd Return
Case Ground
Terminals
2
3
8
9
All Others
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature
range with filter soldered to the specified demonstration board with impedance
matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the pass-
band. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and
"ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject
to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1 and
Port 2, so that the filter must always be installed in one direction per the circuit
design.
7. US and international patents may apply.
8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
9. ©Copyright 1999, RF Monolithics Inc.
10. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF1056A 112904
Free Datasheet http://www.datasheetlist.com/

1 page




SF1056A pdf

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet SF1056A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SF1056A110.592 MHz SAW FilterRFM
RFM

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar