DataSheet.es    


PDF SBT-16-G-J11-MPC Data sheet ( Hoja de datos )

Número de pieza SBT-16-G-J11-MPC
Descripción Projection Chipset
Fabricantes Luminus 
Logotipo Luminus Logotipo



Hay una vista previa y un enlace de descarga de SBT-16-G-J11-MPC (archivo pdf) en la parte inferior de esta página.


Total 16 Páginas

No Preview Available ! SBT-16-G-J11-MPC Hoja de datos, Descripción, Manual

PRODUCT DATA SHEET
PhlatLightSBT16
Projection Chipset
Technology Overview
Luminus Devices’ Projection Technology (PT) is an innovative
solid-state light source created to replace arc lamps in projec-
tion systems, enabling a new category of lamp-free projectors.
Enabled by unique use of Photonic Lattice technology, Phlat-
Light chipsets represent a major breakthrough in brightness
that delivers all the benefits of solid state light sources in pro-
jections applications:
- Wide color gamut for vivid colors, exceeds NTSC.
- Environmentally friendly technology - Mercury-fre.
- Instant start and re-start - no more wait time.
- High reliability; no more lamp replacement.
- Electronic control of color points and light intensity on
a frame by frame basis
PhlatLight products benefit from numerous innovations in the
domain of packaging, thermal management and optical cou-
pling that allow designers to achieve efficient light engine de-
signs and deliver high screen brightness.
Angular Intensity Distribution -Example
1.2
GR EEN , B LU E
R ED
1.0
0.8
0.6
0.4
0.2
0.0
-100 -80 -60 -40 -20 0
20 40 60 80 100
Angle (degrees)
Features
Matched RGB Chipset with 1.6mm2 emitting area designed
for small, pico projector and “value” pocket projector
applications
Photonic lattice technology for very high surface brightness
Wide color gamut: RED 623 nm, GREEN 525 nm, BLUE 460 nm
typical dominant wavelength
Single emitting area per color allows for collection with sin-
gle lens for simplified optics
16:10 aspect ratio optimized for WVGA, WXGA or other
wide aspect ratio micro-displays
Uniform surface emission
Compact, small footprint surface mount (SMT) package, with
built-in alignment features
RoHS compliant (EU-2002/95/EC Directive)
Applications
Large dynamic range allows optimum performance in both
battery-powered and AC powered systems
Optimized for Micro-Display diagonal sizes ranging from 0.2”
to 0.4”.
Compatible with all micro-display technologies including
DLP™ and LCoS.
Confidential © 2011 Luminus Devices, Inc. - All Rights Reserved
Updated 05/17/11
PDS-001478 Rev 04
Free Datasheet http://www.datasheetlist.com/

1 page




SBT-16-G-J11-MPC pdf
SBT16 - Product Datasheet Rev 04
Absolute Maximum Ratings
Symbol
Red
Green
EP-Blue
Unit
Minimum Current (CW or Pulsed) 1
Min
Maximum Current (CW) 2
Max
Maximum Current (pulsed) 1,3
(t<= 2.5ms, frequency > 240Hz, duty cycle <60%)
Absolute Maximum Junction Temperature4
Max
Storage Temperature Range
Tjmax
200
2.4
4.8
110
-40/+100
200
2.4
4.8
150
-40/+100
200
2.4
4.8
150
-40/+100
mA
A
A
ºC
ºC
Note 1:
Note 2:
Product performance and lifetime data is specified at recommended forward drive currents. Sustained operation at or near absolute
minimum currents may result in a reduction of device performance and device lifetime compared to recommended forward drive cur-
rents.
Luminus PhlatLight LEDs are designed for operation to an absolute maximum forward drive current density of 1.5A/mm2 cw, and 3.0A/
mm2 pulsed (f>240Hz, duty cycle < 60%). Please refer to absolute maximum rating table above for specific absolute maximum currents
for the products covered in this datasheet.
Product lifetime data is specified at recommended forward drive currents. Sustained operation at absolute maximum currents will
result in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on
junction temperature. Refer to the lifetime derating curves for further information.
Note 3: In pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds.
Note 4: Sustained operation at or above the Absolute Maximum Junction Temperature (Tjmax) will result in reduced device life time.
Confidential © 2011 Luminus Devices, Inc. - All Rights Reserved
PDS-001478 Rev 04 Page 5
Free Datasheet http://www.datasheetlist.com/

5 Page





SBT-16-G-J11-MPC arduino
SBT16 - Product Datasheet Rev 04
Reflow Soldering Characteristics
Solder profile guideline
Solder Profile Stage
Profile Length, Ambient to Peak
Time Maintained Above: Temperature
Time Maintained Above: Time
Cooldown Rate
Cooldown Duration
Lead-free solder
2.75 - 3.5 minutes
217 ºC
30 - 60 seconds
4º C/sec
45 ± 15 sec
Lead-based solder
2.75 - 3.5 minutes
183 ºC
30-60 seconds
4º C/sec
45 ± 15 sec
Note: 1.
Note: 2.
Note: 3.
Note: 4.
Temperatures are taken and monitored at the component copper layer
Optimum profile may differ due to oven type, circuit board or assembly layout
Recommended lead free, no-clean solder: AIM NC254-SAC305
Refer to APN-001473: PhlatLight Soldering and Handling application note for additional solder profiles and details.
Confidential © 2011 Luminus Devices, Inc. - All Rights Reserved
PDS-001478 Rev 04 Page 11
Free Datasheet http://www.datasheetlist.com/

11 Page







PáginasTotal 16 Páginas
PDF Descargar[ Datasheet SBT-16-G-J11-MPC.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SBT-16-G-J11-MPAProjection ChipsetLuminus
Luminus
SBT-16-G-J11-MPBProjection ChipsetLuminus
Luminus
SBT-16-G-J11-MPCProjection ChipsetLuminus
Luminus
SBT-16-G-J11-MPDProjection ChipsetLuminus
Luminus

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar