DataSheet.es    


PDF FX11LA-92P-SV Data sheet ( Hoja de datos )

Número de pieza FX11LA-92P-SV
Descripción 0.5mm Pitch Connectors
Fabricantes HRS 
Logotipo HRS Logotipo



Hay una vista previa y un enlace de descarga de FX11LA-92P-SV (archivo pdf) en la parte inferior de esta página.


Total 16 Páginas

No Preview Available ! FX11LA-92P-SV Hoja de datos, Descripción, Manual

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
FX11 Series
Stacking height : 2mm
Stacking height : 2.5mm, 3mm
Features
1. Low Profile Design
The board to board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs.
2. Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through
a design that fixes ground plates to both sides of the
header and receptacle.
3. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
4. Metal Fittings for Added Solder Weld Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling.The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
5. Suited to High-Density Applications
The signal contact pitch of 0.5mm produces a smaller
connector utilizing less board area for mounting.
6. Structure Prevents Solder Wicking
A solder gap has been designed into the contact SMT
portion to prevent solder wicking.
7. High contact reliability
Effective mating length is 0.55mm (2mm height),
1mm(2.5mm, 3mm height) for signal contacts.
8. Optional Ground Plate
An alternate style without the ground plate is available.The
space provided by the ground plate removal has been filled
with additional signal contacts.
Applications
Notebook computers, PDA, and other miniature electronic equipment.
10 Signal: 1 Ground Arrangement
Housing
Metal fitting
0.5mm
0.75mm
Ground Plate
Signal contact
0.75mm
Ground plate and metal fitting make contact
Stacking height variation
2mm 2.5 , 3
mm
Note: 2.0mm type and 2.5mm, 3mm type are not mated with each other.
Structure Prevent solder vicking
Contact
surface
Solder gap portion
Board mounting portion
Land
A222
Free Datasheet http://www.datasheet-pdf.com/

1 page




FX11LA-92P-SV pdf
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHFS Xpr1od1ucStserhiaevesbee0n.d5ismcomntinPueitdc, ohr wCilol bnendiesccotnotinrusedwsiotohn. GPleraoseucnhdeckPthlaetperofdourcts2smtamtustoon t3hemHmirosBe woeabrsdite-tRooH-BS soeaarrcdh aCt wownwn.heircostieo-cnonsnectors.com, or contact your Hirose sales representative.
Receptacle with ground Plate
2mm stacking height
(0.5)
A±0.2
0.5±0.05
0.2±0.05
(0.75)
(0.75)
(6)
B±0.2
C±0.3
2-(Ø0.8)
D±0.1
Guidepost
Unit : mm
Part Number
CL No.
FX11LA-060S/06-SV(71)
FX11LA-080S/08-SV(71)
FX11LA-100S/10-SV(71)
FX11LA-120S/12-SV(71)
FX11LB-060S/06-SV(71)
FX11LB-080S/08-SV(71)
FX11LB-100S/10-SV(71)
FX11LB-120S/12-SV(71)
573-0102-1-71
573-0103-4-71
573-0104-7-71
573-0105-0-71
573-0112-5-71
573-0113-8-71
573-0114-0-71
573-0115-3-71
Number of contacts
Signal Ground
A
60 6 17.5
80 8 23.5
100 10 29.5
120 12 35.5
60 6 17.5
80 8 23.5
100 10 29.5
120 12 35.5
B
12
18
24
30
12
18
24
30
CDE F
Remarks
RoHS
25 20.8 25.4 22.2
31 26.8 31.4 28.2
With guideposts
37 32.8 37.4 34.2
43 38.8 43.4 40.2
25 ---------- 25.4 22.2
YES
31 ---------- 31.4 28.2
Without guideposts
37 ---------- 37.4 34.2
43 ---------- 43.4 40.2
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
0.5±0.03
E+00.1
F
0
-- 0.1
D±0.05
A±0.05
0.75±0.03
0.75±0.03
A226
2
4 Ø0.9±0.05
1.65±0.05
1 6±0.05
0.7±0.03(Land)
4.4±0.05
0.6±0.03(Metal mask)
B±0.05
Ø1±0.05 4
0.3±0.03(Land)
0.25±0.03(Metal mask)
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 Not required in products without guideposts.
Free Datasheet http://www.datasheet-pdf.com/

5 Page





FX11LA-92P-SV arduino
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHFS Xpr1od1ucStserhiaevesbee0n.d5ismcomntinPueitdc, ohr wCilol bnendiesccotnotinrusedwsiotohn. GPleraoseucnhdeckPthlaetperofdourcts2smtamtustoon t3hemHmirosBe woeabrsdite-tRooH-BS soeaarrcdh aCt wownwn.heircostieo-cnonsnectors.com, or contact your Hirose sales representative.
Receptacle with ground plate
2.5mm, 3mm stacking height
(0.5)
A±0.2
0.5±0.05
0.2±0.05
(0.75)
(0.75)
(6)
B±0.2
C±0.3
Part Number
FX11A- 60S/ 6-SV(71)
FX11A- 80S/ 8-SV(71)
FX11A-100S/10-SV(71)
FX11B- 60S/ 6-SV(71)
FX11B- 80S/ 8-SV(71)
FX11B-100S/10-SV(71)
CL No.
573-0702-9-71
573-0703-1-71
573-0704-4-71
573-0712-2-71
573-0713-5-71
573-0714-8-71
Number of contacts
Signal Ground
A
60 6 17.5
80 8 23.5
100 10 29.5
60 6 17.5
80 8 23.5
100 10 29.5
2-(Ø0.8)
BC
12 25
18 31
24 37
12 25
18 31
24 37
D±0.1
Guidepost
Unit : mm
DEF
Remarks
RoHS
20.8 25.4 22.2
26.8 31.4 28.2 With guideposts
32.8 37.4 34.2
---------- 25.4 22.2
YES
---------- 31.4 28.2 Without guideposts
---------- 37.4 34.2
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
E +0.1
0
F0
-0.1
D±0.05
A±0.05
0.5±0.03
0.75±0.03
0.75±0.03
A232
2
4 Ø0.9±0.05
1.65±0.05
4.4±0.05
6±0.05 0.7±0.03(Land)
0.6±0.03(Metal mask)
B±0.05
Ø1±0.05 4
0.3±0.03(Land)
0.25±0.03(Metal mask)
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, totaling 2 places, indicate the metal fittings.
3 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 Not required in products without guideposts.
Free Datasheet http://www.datasheet-pdf.com/

11 Page







PáginasTotal 16 Páginas
PDF Descargar[ Datasheet FX11LA-92P-SV.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
FX11LA-92P-SV0.5mm Pitch ConnectorsHRS
HRS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar