|
|
Número de pieza | EC215R | |
Descripción | (EC214 / EC215) Multi-Range Conductivity Meters Manual | |
Fabricantes | Hanna | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EC215R (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! Instruction Manual
EC214
EC215 • EC215R
Multi-Range
Conductivity Meters
for Laboratories
www.hannainst.com
Free Datasheet http://www.datasheet
1 page OPERATIONAL GUIDE
Power connection
Plug the 12 Vdc adapter into the power supply socket.
Note: Make sure the main line is protected by a fuse.
Probe connection
Connect the conductivity probe to the proper socket on the rear panel.
Note: Make sure that the instrument has been calibrated before
taking any measurement (see “Calibration” section).
Note: If possible, use plastic beakers to minimize EMC interferences.
TAKING CONDUCTIVITY MEASUREMENTS WITH EC214
• Switch the instrument on by pressing ON/OFF.
• Immerse the probe in the solution while com-
pletely submerging the holes of the sleeve. Tap
the probe lightly on the bottom of the beaker
to remove any air bubbles trapped inside the
sleeve. Measure the solution temperature with
a Checktemp or another accurate thermom-
eter.
• Press the “COND/°C” key to select temperature
setting.
• Adjust the “TEMPERATURE” knob to display the temperature of
the solution on the LCD.
• Press the “COND/°C” key to select conductivity
reading.
• Select the appropriate conductivity range.
8
Note: If the display shows "1", there is an over-range condition.
Select the next higher range.
• Allow a few minutes for the reading to stabilize. The LCD will
display the temperature compensated conductivity reading.
TAKING CONDUCTIVITY MEASUREMENTS WITH EC215
• Switch the instrument on by pressing ON/OFF.
• Immerse the probe in the solution while com-
pletely submerging the holes of the sleeve. Tap
the probe lightly on the bottom of the beaker to
remove any air bubbles trapped inside the
sleeve.
• Adjust the "TEMPERATURE COEFFICIENT" knob to the temperature
coefficient value of the solution (see “Determination of the Tem-
perature Coefficient of a Solution” section for details).
• Select the appropriate conductivity range.
Note: If the display shows "1", there is an over-range condition.
Select the next higher range.
• Allow a few minutes for the reading to stabilize. The LCD will
display the temperature compensated conductivity reading.
9
Free Datasheet http://www.datasheet-pdf.com/
5 Page SALES AND TECHNICAL SERVICE CONTACTS
Australia:
Tel. (03) 9769.0666 • Fax (03) 9769.0699
China:
Tel. (10) 88570068 • Fax (10) 88570060
Egypt:
Tel. & Fax (02) 2758.683
Germany:
Tel. (07851) 9129-0 • Fax (07851) 9129-99
Greece:
Tel. (210) 823.5192 • Fax (210) 884.0210
Indonesia:
Tel. (21) 4584.2941 • Fax (21) 4584.2942
Japan:
Tel. (03) 3258.9565 • Fax (03) 3258.9567
Korea:
Tel. (02) 2278.5147 • Fax (02) 2264.1729
Malaysia:
Tel. (603) 5638.9940 • Fax (603) 5638.9829
Singapore:
Tel. 6296.7118 • Fax 6291.6906
South Africa:
Tel. (011) 615.6076 • Fax (011) 615.8582
Taiwan:
Tel. 886.2.2739.3014 • Fax 886.2.2739.2983
Thailand:
Tel. 66.2619.0708 • Fax 66.2619.0061
United Kingdom:
Tel. (01525) 850.855 • Fax (01525) 853.668
USA:
Tel. (401) 765.7500 • Fax (401) 765.7575
For e-mail contacts and complete list of Sales and
Technical offices, please see www.hannainst.com
Free Datasheet http://www.datasheet-pdf.com/
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet EC215R.PDF ] |
Número de pieza | Descripción | Fabricantes |
EC215 | (EC214 / EC215) Multi-Range Conductivity Meters Manual | Hanna |
EC215R | (EC214 / EC215) Multi-Range Conductivity Meters Manual | Hanna |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |