DataSheet.es    


PDF TC4051BFN Data sheet ( Hoja de datos )

Número de pieza TC4051BFN
Descripción SINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXER
Fabricantes Toshiba 
Logotipo Toshiba Logotipo



Hay una vista previa y un enlace de descarga de TC4051BFN (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! TC4051BFN Hoja de datos, Descripción, Manual

TC4051,4052,4053BP/BF/BFN/BFT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC4051BP, TC4051BF, TC4051BFN, TC4051BFT
TC4052BP, TC4052BF, TC4052BFN, TC4052BFT
TC4053BP, TC4053BF, TC4053BFN, TC4053BFT
TC4051B
Single 8-Channel Multiplexer/Demultiplexer
TC4052B
Differential 4-Channel
Multiplexer/Demultiplexer
TC4053B
Triple 2-Channel Multiplexer/Demultiplexer
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC4051BP, TC4052BP, TC4053BP
TC4051B, TC4052B and TC4053B are multiplexers with
capabilities of selection and mixture of analog signal and digital
signal. TC4051B has 8 channels configuration. TC4052B has 4
channel × 2 configuration and TC4053B has 2 channel × 3
configuration. The digital signal to the control terminal turns
“ON” the corresponding switch of each channel, with large
amplitude (VDD VEE) can be switched by the control signal
with small logical amplitude (VDD VSS). For example, in the
case of VDD = 5 V VSS = 0 V and VEE = 5 V, signals between 5
V and +5 V can be switched from the logical circuit with single
power supply of 5 volts. As the ON-resistance of each switch is
low, these can be connected to the circuits with low input
impedance.
TC4051BF, TC4052BF, TC4053BF
TC4051BFN, TC4052BFN, TC4053BFN
TC4051BFT, TC4052BFT, TC4053BFT
Weight
DIP16-P-300-2.54A
SOP16-P-300-1.27A
SOL16-P-150-1.27
TSSOP16-P-0044-0.65A
: 1.00 g (typ.)
: 0.18 g (typ.)
: 0.13 g (typ.)
: 0.06 g (typ.)
1 2007-10-01

1 page




TC4051BFN pdf
Operating Ranges (Note)
TC4051,4052,4053BP/BF/BFN/BFT
Characteristics
Symbol
Test Condition
Min Typ. Max Unit
DC supply voltage
Control input voltage
Input/output voltage
VDD-VSS
VDD-VEE
VIN
VIN/VOUT
3 18
V
3 18
VSS VDD V
VEE VDD V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused Control inputs must be tied to either VDD or VSS.
Static Electrical Characteristics
Characteristics
Control input high
voltage
Control input low
voltage
On-state
resistance
ΔOn-state
resistance
between any 2
switches
Input/output
leakage current
Quiescent supply
current
Input current
Input capacitance
Switch input
capacitance
Output
capacitance
Feedthrough
capacitance
Symbol
Test Condition
40°C
25°C
85°C
VSS VEE VDD
(V) (V) (V)
Min
Max
Min
Typ.
Max
Min
Unit
Max
VIH
VIS = VDD
thru 1 kΩ
VIL
5 3.5 3.5 2.75 3.5
VEE = VSS 10
7.0
7.0 5.50
7.0
RL = 1 kΩ
to VSS
15
11.0
11.0 8.25
11.0
IIS < 2 μA 5 1.5 2.25 1.5 1.5
on all OFF
channels
10
3.0
4.5 3.0
3.0
15 4.0 6.75 4.0 4.0
V
V
0 0 5 850 240 950 1200
RON
0 VIS VDD
RL = 10 kΩ
0
0
0 10
0 15
210
140
110 250
80 160
300 Ω
200
0 0 5 ⎯ ⎯ ⎯ 10 ⎯ ⎯ ⎯
RONΔ
0 0 10 ⎯ ⎯ ⎯ 6 ⎯ ⎯ ⎯ Ω
0 0 15 ⎯ ⎯ ⎯ 4 ⎯ ⎯ ⎯
IOFF
VIN = 18 V, VOUT = 0 V
VIN = 0 V, VOUT = 18 V
18 ⎯ ±100 ⎯ ±0.01 ±100 ⎯ ±1000
nA
18 ⎯ ±100 ⎯ ±0.01 ±100 ⎯ ±1000
5 5.0 0.005 5.0 150
IDD VIN = VSS, VDD
(Note) 10 10 0.010 10 300 μA
15 20 0.015 20 600
IIN
VIH = 18 V
VIL = 0 V
18 0.1 105 0.1 1.0
18
0.1
⎯ −105 0.1
μA
1.0
CIN
⎯⎯ ⎯ ⎯
5 7.5 ⎯ ⎯ pF
CIN ⎯ ⎯ ⎯ ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
COUT
CIN-
C-OUT
TC4051B
TC4052B
TC4053B
TC4051B
TC4052B
TC4053B
10 ⎯ ⎯ ⎯ 58 ⎯ ⎯ ⎯
10 ⎯ ⎯ ⎯ 30 ⎯ ⎯ ⎯ pF
10 ⎯ ⎯ ⎯ 17 ⎯ ⎯ ⎯
10 ⎯ ⎯ ⎯ 0.2 ⎯ ⎯ ⎯
10 ⎯ ⎯ ⎯ 0.2 ⎯ ⎯ ⎯ pF
10 ⎯ ⎯ ⎯ 0.2 ⎯ ⎯ ⎯
Note: All valid input combinations.
5 2007-10-01

5 Page





TC4051BFN arduino
TC4051,4052,4053BP/BF/BFN/BFT
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
11 2007-10-01

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet TC4051BFN.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TC4051BFSINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERToshiba
Toshiba
TC4051BFNSINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERToshiba
Toshiba
TC4051BFTSINGLE 8-CHANNEL MULTIPLEXER/DEMULTIPLEXERToshiba
Toshiba

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar