DataSheet.es LC320WXE-SBB1 Hoja de datos PDF


PDF LC320WXE-SBB1 Datasheet ( Hoja de datos )

Número de pieza LC320WXE-SBB1
Descripción WXGA TFT LCD Module
Fabricantes LG 
Logotipo LG Logotipo
Vista previa
Total 39 Páginas
		
LC320WXE-SBB1 datasheet

1 Page

LC320WXE-SBB1 pdf
Product Specification
RECORD OF REVISIONS
Revision No.
0.1
0.2
Revision Date
Jun, 30, 2008
Jul, 14, 2008
0.3 Aug, 12, 2008
0.4 Aug, 20, 2008
Page
Description
- Preliminary Specification(First Draft)
21,22 Change of Mechanical drawing(Cover bottom)
1,A3-6,14 Change of Model Name(SBD1ÆSBB1)
22 Change of Mechanical drawing(UDM Hole Size)
- Change of TDB SPEC
LC320WXE
Ver. 0.4
3 / 27
Free Datasheet http://www.datasheet4u.net/

5 Page

LC320WXE-SBB1 arduino
Product Specification
LC320WXE
Vpk-pk
Vs = (Vpk-pk) / [ 2*root(2)]
S TIME
4. Lamp frequency may produce interference with horizontal synchronous frequency and as a result this may
cause beat on the display. Therefore, lamp frequency shall be as away possible from the horizontal
synchronous frequency and its harmonics range in order to prevent interference.
5. The brightness of the lamp after lighted for 5minutes is defined as 100%.
TS is the time required for the brightness of the center of the lamp to be not less than 95% at typical current.
The screen of LCD module may be partially dark by the time the brightness of lamp is stable after turn on.
6. Maximum level of power consumption is measured at initial turn on.
Typical level of power consumption is measured after 2hrs aging at 25 ± 2°C.
7. The life time is determined as the time at which brightness of the lamp is 50% compared to that of initial
value at the typical lamp current on condition of continuous operating at 25 ± 2°C, based on duty 100%.
8.The output of the inverter must have symmetrical(negative and positive) voltage and current waveform
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has not only unsymmetrical
voltage and current but also spike wave.
Requirements for a system inverter design, which is intended to achieve better display performance,
power efficiency and more reliable lamp characteristics.
It can help increase the lamp lifetime and reduce leakage current.
a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion rate of the waveform should be within 2 ±10%.
* Inverter output waveform had better be more similar to ideal sine wave.
Ver. 0.4
Ip
I -p
* Asymmetry rate:
| I p – I –p | / Iop x 100%
* Distortion rate
I p (or I –p) / Iop
8 / 27
Free Datasheet http://www.datasheet4u.net/

10 Page





PáginasTotal 39 Páginas
PDF Descargar[ LC320WXE-SBB1.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
LC320WXE-SBB1WXGA TFT LCD ModuleLG
LG

Número de piezaDescripciónFabricantes
SSM2604

Low Power Audio Codec.

Analog Devices
Analog Devices
SLG3NB3331

32.768 kHz and MHz GreenCLK.

Silego
Silego
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices
SDC1741

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z


www.DataSheet.es    |   2018   |  Contacto  |  Buscar