DataSheet.es    


PDF XD-452 Data sheet ( Hoja de datos )

Número de pieza XD-452
Descripción (XD-xx2) COMPACT HI-FI SYSTEM MANUAL
Fabricantes KENWOOD 
Logotipo KENWOOD Logotipo



Hay una vista previa y un enlace de descarga de XD-452 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! XD-452 Hoja de datos, Descripción, Manual

COMPACT HI-FI SYSTEM
XD-SERIES
XD-502/XD-552/XD-572S
XD-402/XD-452
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country
and sales area.
COMPACT
DIGITAL AUDIO
TEXT
B60-4202-00 00 MA (K,P,Y,M,X,T,Q,E2) MC 9809
Free Datasheet http://www.datasheet4u.com/

1 page




XD-452 pdf
13.Lightning – For added protection for this appliance during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the appliance due to lightning and power-line
surges.
14.Abnormal smell – If an abnormal smell or smoke is
detected, immediately turn the power OFF and unplug
the appliance from the wall outlet. Contact your dealer or
nearest service center.
POWER OFF!
IMPORTANT SAFEGUARDS 5
XD-SERIES (En)
18.Power lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
19.AC outlets – Do not connect other audio equipment
with a power consumption larger than that specified to
the AC outlet on the rear panel. Never connect other
electrical appliances, such as an iron or toaster, to it to
prevent fire or electric shock.
15.Damage requiring service – The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the
appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally by
following the instruction manual. Adjust only those controls
that are covered by the instruction manual as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation.
E. The appliance has been dropped, or the enclosure
damaged.
F. The appliance exhibits a marked change in performance.
16.Servicing – The user should not attempt to service the
appliance beyond that described in the instruction
manual. All other servicing should be referred to qualified
service personnel.
17.Outdoor antenna grounding – If an outside antenna is
connected to the appliance, be sure the antenna system
is grounded so as to provide some protection against
voltage surges and built up static charges. Article 810 of
the National Electrical Code ANSI/NFPA 70, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements
for the grounding electrode. See Figure.
20. Overloading – Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk
of fire or electric shock.
21. Attachment – Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
22. Replacement parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original parts. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
23. Safety check – Upon completion of any service or repairs to
this appliance, ask the service technician to perform safety
checks to determine that the appliance is in proper operating
condition.
Notes
1.Item 3 is not required except for grounded or polarized
equipment.
2.Item 17 and 18 are not required except for units provided
with antenna terminals.
3.Item 17 complies with UL in the U.S.A.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMPS
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
Free Datasheet http://www.datasheet4u.com/

5 Page





XD-452 arduino
System connection 11
XD-SERIES (En)
Surround (rear) speakers
XD-5....series : Except for U.S.A. amd Canada
XD-4....series : Except for U.S.A., Canada, U.K.,
Europe and Russia
RL
−+
·ª
−+
·ª
++
FM outdoor antenna
Lead the 75coaxial cable connected to the FM out-
door antenna into the room and connect it to the FM
75termimal.
Use a commercially-available antenna
adapter (a small-sized model).
ANTENNA
FM
75
--
@#
ON OFF
SURROUND
RL
SURROUND
SPEAKERS
(8-16)
Surround switch
In regard to the SURROUND switch
This switch can be used only when the separately sold
surround (rear) speakers are connected. When the
switch is set to ON, surround playback can be enjoyed.
When this switch is set to OFF, normal playback is ex-
ecuted.
@#
ON OFF
SURROUND
÷ Please operate this switch while the power is switched
off.
÷ We recommend to keep this switch set to OFF when no
surround (rear) speakers are connected to obtain a
better sound quality.
÷ When the switch is set to OFF, no sound will come from
the surround (rear) speakers.
GND
AM
Reception mode switching of FM broadcast
(For Russia)
When you want to receive an FM broadcast in PILOT
TONE mode, changing the setting as follows.
1 Select the TUNER input.
2 While holding the SELECT key depressed, turn
the SOUND CONTROL jog dial to select the
system mode.
SOUND CONTROL
SELECT
1
Twist
Main Unit
23
4
1 POLAR system
2 PILOT TONE system
Polar
Pilot
Speaker Unit
3 Establish the selection.
1 23 4
ENTER
Twist
Free Datasheet http://www.datasheet4u.com/

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet XD-452.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
XD-452(XD-xx2) COMPACT HI-FI SYSTEM MANUALKENWOOD
KENWOOD

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar