DataSheet.es    


PDF D2HWC201M Data sheet ( Hoja de datos )

Número de pieza D2HWC201M
Descripción Smallest Sealed Snap-Action Switch
Fabricantes Omron 
Logotipo Omron Logotipo



Hay una vista previa y un enlace de descarga de D2HWC201M (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! D2HWC201M Hoja de datos, Descripción, Manual

Sealed Subminiature Snap Action Switch
D2HW
Smallest Sealed Snap-Action Switch in
the Industry With a Long Stroke For
Reliable ON/OFF Action
• Conforms to IP67
• Case dimensions 22% smaller than conventional models
• Extra-long stroke even without levers
(OT: 1.4 mm)
• All models are lead-free, including lead wire models
• RoHS Compliant
Ordering Information
Add “S” to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
PCB-Mounted Models
Actuator
Terminals
Contact form
Model
With posts on right
With posts on left Without posts
Pin plunger
Hinge lever
Long hinge
lever
For PCB
Simulated roller
lever
Straight
Angled
Straight
Angled
Straight
Angled
Straight
Angled
SPDT
---
D2HW-BR201DR
---
D2HW-BR211DR
---
D2HW-BR221DR
---
D2HW-BR231DR
---
D2HW-BL201DL
---
D2HW-BL211DL
---
D2HW-A201D
---
D2HW-A211D
---
D2HW-A221D
D2HW-BL221DL ---
--- D2HW-A231D
D2HW-BL231DL ---
Models with Solder Terminals or Lead Wire Terminals
Actuator
Terminals
Contact form
Model
With posts on right With posts on left M3-screw mounting
Pin plunger
Solder
Lead wire
Downwards
SPDT
SPDT
SPST-NC
SPST-NO
D2HW-BR201H
D2HW-BR201M
D2HW-BR202M
D2HW-BR203M
(This table continues on the next page.)
D2HW-BL201H
D2HW-BL201M
D2HW-BL202M
D2HW-BL203M
D2HW-C201H
D2HW-C201M
D2HW-C202M
D2HW-C203M
Sealed Subminiature Snap Action Switch D2HW
181
Free Datasheet http://www.datasheet4u.com/

1 page




D2HWC201M pdf
Dimensions
Mounting Structure and Reference Positions for Operating Characteristics
Note: 1. All units are in millimeters unless otherwise indicated.
2. Dimensions not indicated in the diagrams have a tolerance of ±0.2 mm
3. The reference positions used for FP, OP, and TTP values are as shown below for each type of mounting.
Models without Posts
D2HW-A@
Models with Posts
D2HW-B@
M3-screw Mounting Models
D2HW-C@
1.7 dia.
1.7 dia.
3
0
0.1
dia.
3.3±0.15 dia.
Reference
position
Reference
position
Reference
position
Mounting Hole Dimensions (Reference) Mounting Hole Dimensions (Reference)
2.4+00.1 dia. hole
(depth: 5 mm min.)
2.6
3
+0.1
0
dia.
hole
(depth: 1.5 mm min.)
M3 tap
Terminals
Straight PCB Terminals
Angled PCB Terminals
Solder Terminals
Three-0.6
PCB Cutout Dimensions (Reference)
Three,
1
+0.1
0
dia.
hole
Three-0.6
(3.1)
3.5
Three-2
PCB Cutout Dimensions (Reference)
2.4
+0.1
0
dia.
hole
(depth: 5 mm min.)
2.6
Lead Wires Downwards
Lead Wires on Left-side
Three, 1+00.1 dia. hole
Lead Wires on Right-side
(12)
(12) (12)
(13.3)
(13.3)
Note: UL1007 AWG24 wires are used for UL/CSA approved models.
Angled terminal directions are shown below.
COM AVSS 0.5
(Black)
NO AVSS 0.5 (Blue)
NC AVSS 0.5 (Red)
See Note
Left-angled terminal Right-angled terminal
Sealed Subminiature Snap Action Switch D2HW
185
Free Datasheet http://www.datasheet4u.com/

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet D2HWC201M.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
D2HWC201HSmallest Sealed Snap-Action SwitchOmron
Omron
D2HWC201MSmallest Sealed Snap-Action SwitchOmron
Omron

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar