DataSheet.es    


PDF TH-58PX60U Data sheet ( Hoja de datos )

Número de pieza TH-58PX60U
Descripción (TH-xxPX60x) Digital High Definition Plasma Television Manual
Fabricantes Panasonic 
Logotipo Panasonic Logotipo



Hay una vista previa y un enlace de descarga de TH-58PX60U (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! TH-58PX60U Hoja de datos, Descripción, Manual

Operating Instructions
Digital High Definition Plasma Television
Manual de instrucciones
Televisor digital con pantalla de plasma de alta definición
Model No. TH-37PX60U
Número de modelo TH-42PX60U
TH-50PX60U
TH-50PX60X
TH-58PX60U
English
Español
R
For assistance, please call : 1-888-VIEW-PTV (843-9788)
or contact us at www.panasonic.com/contactinfo
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
Para solicitar ayuda, llame al: 1-888-VIEW-PTV (843-9788)
ó visítenos en www.panasonic.com/contactinfo
Para solicitar ayuda, llame al: 787-750-4300
ó visítenos en www.panasonic.com
(U.S.A.)
(Puerto Rico)
(Canada)
(EE.UU.)
(Puerto Rico)
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TQB2AA0663-2
Free Datasheet http://www.datasheet4u.com/

1 page




TH-58PX60U pdf
WARNING/CAUTION
WARNING
If problems occur during use
If a problem occurs (such as no picture or no sound), or if
SMALL PARTS CAN PRESENT CHOKING HAZARD IF
smoke or an abnormal odor is detected from the Plasma
ACCIDENTALLY SWALLOWED.
TV, unplug the power cord immediately.
KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
Continued use of the TV under these conditions might cause
DISCARD UNNEEDED SMALL PARTS AND OTHER
fire or permanent damage to the unit. Have the TV evaluated
OBJECTS, INCLUDING PACKAGING MATERIALS AND
PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING
PLAYED WITH BY YOUNG CHILDREN, CREATING THE
at an Authorized Service Center. Servicing of the TV by any
unauthorized personnel is strongly discouraged due to its high
POTENTIAL RISK OF SUFFOCATION.
voltage dangerous nature.
If water or foreign objects get inside the Plasma TV, if the
Set up
Plasma TV is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.
Do not place the Plasma TV on sloped or unstable surfaces. A short may occur, which could cause fire. Contact an
The Plasma TV may fall off or tip over.
Do not place any objects on top of the Plasma TV.
If water spills onto the Plasma TV or foreign objects get inside
Authorized Service Center for any repairs that need to be
made.
it, a short-circuit may occur which could result in fire or electric
shock. If any foreign objects get inside the Plasma TV, please
CAUTION
consult an Authorized Service Center.
Do not cover the ventilation holes.
This Plasma TV is for use only with the following
optional accessories. Use with any other type of optional
accessories may cause instability which could result in the
possibility of injury.
(All of the following accessories are manufactured by
Matsushita Electric Industrial Co., Ltd.)
• Wall-hanging bracket (Vertical):
TY-WK42PV3U (TH-37PX60U, TH-42PX60U,
TH-50PX60U, TH-50PX60X, TH-58PX60U)
• Wall-hanging bracket (Angled):
TY-WK42PR2U, TY-WK42PR3U (TH-37PX60U,
TH-42PX60U, TH-50PX60U, TH-50PX60X)
Always be sure to ask a qualified technician to carry out set-up.
AC Power Supply Cord
The Plasma TV is designed to operate on 120 V AC, 50/60 Hz
(TH-37PX60U, TH-42PX60U, TH-50PX60U, TH-58PX60U) or on
110 - 127 V AC, 50/60 Hz (TH-50PX60X). Securely insert the
power cord plug as far as it will go.
If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
Doing so may cause electric shocks.
Do not do anything that might damage the power cable.
When disconnecting the power cable, hold the plug, not the
cable.
Do not make any modifications to, place heavy objects on, place
near hot objects, heat, bend, twist or forcefully pull the power cable.
Doing so may cause damage to the power cable which can cause
Doing so may cause the Plasma TV to overheat, which can
cause fire or damage to the Plasma TV.
If using the pedestal, leave a space of 3 15/16” (10 cm) or
more at the top, left and right, 2 3/8” (6 cm) or more at the
bottom, and 2 3/4” (7 cm) or more at the rear.
When using the Plasma TV
Be sure to disconnect all cables before moving the Plasma
TV.
Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety
precaution before carrying out any cleaning.
Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from
becoming dusty.
Built-up dust on the power cord plug can increase humidity
which might damage the insulation and cause fire. Unplug the
cord from the wall outlet and clean it with a dry cloth.
This Plasma TV radiates infrared rays; therefore, it may
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step.
(Young children should be made particularly aware of this
caution.)
If the unit falls over or becomes damaged through misuse,
injury may result.
The TV will still consume some power as long as the power
cord is inserted into the wall outlet.
fire or electric shock. If damage to the cable is suspected, have it
repaired at an Authorized Service Center.
Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen
(“after image”). This is not considered a malfunction and is
not covered by the warranty.
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
SD Card photo Video game
Computer image
4:3
Setup
12
To prevent after image,
the screen saver is
automatically activated after
a few minutes if no signals
are sent or no operations
are performed. (p. 45)
Do not place the unit where it’s exposed to sunlight or other
bright light (including reflections).
Use of some types of fluorescent lighting may reduce the remote
control’s transmission range.
5
Free Datasheet http://www.datasheet4u.com/

5 Page





TH-58PX60U arduino
Cable Binding Instructions
Attaching the Cable clampers
Do not bundle the RF cable and AC cord
••together (could cause distorted image).
Fix cables with Cable clampers as necessary.
When using the optional accessory, follow the
option’s assembly manual to fix cables.
Snap open
Back of the TV unit
Remove from the TV unit
Snap shut
Push both side hooks
and pull out
Cable Binding Instructions
Bind all cables to the plasma television with the
Cable clamper.
Bundle cables with the Cable clamper on the left
side.
Fasten the AC cord with the Cable clamper on
the right side.
Cable clamper
AC cord
11
Free Datasheet http://www.datasheet4u.com/

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet TH-58PX60U.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TH-58PX60U(TH-xxPX60x) Digital High Definition Plasma Television ManualPanasonic
Panasonic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar