|
|
Número de pieza | 2D51 | |
Descripción | Duct Smoke Detector | |
Fabricantes | System Sensor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 2D51 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! 2D51 Duct Smoke
Detector for
Special Applications
The System Sensor 2D51 low-profile photoelectric smoke
detector with a B210LP base tied to the D4P120 is listed
to Underwriters Laboratories 268A specifically for use in
no-flow/low-flow air-handling systems.
Features for 2D51/B210LP/D4P120
• Low-profile smoke detector design
• Low standby current
• Two LEDs blink in standby
• Detector head plugs easily into base
• Built-in test switch
• Field sensitivity metering of detector to meet the requirements
of NFPA 72 with the use of RTS2/RTS2-AOS and SENS-RDR
• Designed for mounting on a standard electrical box
• SEMS screws for easy wiring and positive wire retention
• Removable cover and insect screen for field cleaning
• Remote push button Test/Reset, LEDs provide visual indications
• Onboard supervisory and alarm relays
• Accepts 24 or 120V supply voltage
• Interconnect up to 100 units for common functions
• Compatible for interconnection with System Sensor InnoviarFlex™
D4120 or D4120W duct smoke detectors and remote accessories
The 2D51 can be used as a pendant mount detector in no-flow/
low-flow air-handling systems (0-4,000 FPM). The pendant /plenum
mounted 2D51 is to be installed into a B210LP base and wired to a
D4P120 power board-only control unit. The D4P120 power board is
capable of controlling up to two 2D51 sensors.
Pendant mounted in a standard electrical box within the duct, the
twist-in/twist-out head allows easy removal from the base for quick
cleaning and maintenance. The 2D51 heads can be locally tested
using a magnet or by using the test/reset push button on the D4P120
power board.
Remote testing is accomplished using the RTS151, RTS151KEY,
RTS-2 or RTS-AOS accessories connected to the D4P120 power
board.
The APA151, RTS2 and RTS2-AOS Remote Annunciators with Piezo
Alarm can also be connected to the D4P120 power board to provide
an audible and visible indication of smoke detector status.
Agency Listings
S911
3029700
7272-1653:203
Free Datasheet http://www.datasheet4u.com/
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet 2D51.PDF ] |
Número de pieza | Descripción | Fabricantes |
2D51 | Duct Smoke Detector | System Sensor |
2D51 | Photoelectric Smoke detector | System Sensor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |