DataSheet.es    


PDF P6SMB100A Data sheet ( Hoja de datos )

Número de pieza P6SMB100A
Descripción Surface Mount TRANSZORB Transient Voltage Suppressors
Fabricantes Vishay Siliconix 
Logotipo Vishay Siliconix Logotipo



Hay una vista previa y un enlace de descarga de P6SMB100A (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! P6SMB100A Hoja de datos, Descripción, Manual

P6SMB Series
Vishay General Semiconductor
Surfacewww.DataSheet4U.com Mount TRANSZORB® Transient Voltage Suppressors
DO-214AA (SMB)
PRIMARY CHARACTERISTICS
VBR uni-directional
VBR bi-directional
PPPM
PD
IFSM (uni-directional only)
TJ max.
6.8 V to 540 V
6.8 V to 220 V
600 W
5.0 W
100 A
150 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g.
P6SMB10CA).
Electrical characteristics apply in both directions.
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of
sensor units for consumer, computer, industrial and
telecommunication.
MECHANICAL DATA
Case: DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1)
Power dissipation on infinite heatsink TA = 50 °C ,
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
SYMBOL
PPPM
IPPM
PD
IFSM
TJ, TSTG
VALUE
600
See next table
5.0
100
- 65 to + 150
UNIT
W
A
W
A
°C
Document Number: 88370 For technical questions within your region, please contact one of the following:
Revision: 21-Oct-08
www.vishay.com
1

1 page




P6SMB100A pdf
www.DataSheet4U.com
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet P6SMB100A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
P6SMB100Surface Mount Transient Voltage SuppressorTaiwan Semiconductor Company
Taiwan Semiconductor Company
P6SMB100600 Watts Surface Mount Transient Voltage SuppressorFuji Electric
Fuji Electric
P6SMB100TVS Diode, SMD (Transient Voltage Suppressor)Pan Jit International
Pan Jit International
P6SMB100AUNI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 600 WATTS/ 6.8 THRU 200 VOLTSCentral Semiconductor Corp
Central Semiconductor Corp

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar