DataSheet.es    


PDF P6SMB6.8CA Data sheet ( Hoja de datos )

Número de pieza P6SMB6.8CA
Descripción Glass Passivated Junction Transient Voltage Suppressor
Fabricantes Luguang Electronic 
Logotipo Luguang Electronic Logotipo



Hay una vista previa y un enlace de descarga de P6SMB6.8CA (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! P6SMB6.8CA Hoja de datos, Descripción, Manual

P6SMB SERIES
Glass Passivated Junction Transient Voltage Suppressor
VOLTAGE - 6.8 TO 550 Volts
600 Watt Peak Pulse Power
Features
• For surface mounted applications in order to
optimize board space
• Glass passivated junction
• Built-in strain relief
• Excellent clamping capability
• Low profile package
• Low inductance
• Excellent clamping capability
• Fast response time: typically less than
1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
250°C/10 seconds at terminals
Mechanical Data
Case: JEDEC DO-214AA Molded plastic
TerminalSolder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Standard Packaging: 12mm tape(EIA STD RS-481)
Weight: 0.003 ounces, 0.093 grams
DO - 214AA(SMB)
4.7± 0.25
5.4± 0.2
1.3± 0.2
0.2± 0.05
Dimensions in millimeters
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use CA Suffix for types P6SMB6.8CA thru types P6SMB550CA Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms (Note 1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
Steady State Power Dissipation at TL = 75°C
Lead lengths .375", 9.5mm (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note 3)
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VALUE
Minimum 600
SEE TABLE 1
1.0
100
Operatings and Storage Temperature Range
NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 5.0mm2 (0.03mm thick) Copper Pads to each termina
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Watts
Amps
°C
http://www.luguang.cn
Free Datasheet http://www.datasheet4u.com/

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet P6SMB6.8CA.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
P6SMB6.8CTVS Diode, SMD (Transient Voltage Suppressor)Pan Jit International
Pan Jit International
P6SMB6.8CABI-DIRECTIONAL GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 600 WATTS/ 6.8 THRU 200 VOLTSCentral Semiconductor Corp
Central Semiconductor Corp
P6SMB6.8CAGlass Passivated Junction Transient Voltage SuppressorLuguang Electronic
Luguang Electronic
P6SMB6.8CA600W Surface Mount Transient Voltage SuppressorsWeitron Technology
Weitron Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar