|
|
PDF LC320EM2 Data sheet ( Hoja de datos )
| Número de pieza | LC320EM2 | |
| Descripción | LCD TV | |
| Fabricantes | Emerson | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC320EM2 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
Español
Français
English
32” LCD TV
LC320EM2
EN Owner's Manual
Need help?
Please call toll free or visit our web site below
FR Manuel du Propriétaire Besoin d’aide? Appelez notre numéro gratuit ou visitez notre site web à l’adresse
ES Manual del Propietario ¿Necesita ayuda? Llame por favor sin costo ó visite nuestro sitio web en
1-866-309-8819
www.emersonaudiovideo.com
MODEL NUMBER
SERIAL NUMBER
© 2011 Funai Electric Co., Ltd.
Free Datasheet http://www.datasheet4u.com/
1 page  
INTRODUCTION
Contents
Important Safety Instructions
Trademark Information
Child Safety
INTRODUCTION
Features
Supplied Accessories
Symbols Used in this Manual
Attaching the Base
Mounting the Unit on Your Furniture
Remote Control Function
Installing the Batteries
Control Panel
Terminals
PREPARATION
Antenna Connection
Connection to Cable Receiver or Satellite Box
Plug In the AC Power Cord
Initial Setup
WATCHING TV
Switching Each Input Mode
Sleep Timer
Sound Functions
Freeze Mode
TV Screen Display Mode
Channel Selection
TV Screen Information
ECO
USING FUNCTIONS
Picture
Sound
Setup
Features
Language
USB
CONNECTING DEVICES
External Device Connection
USEFUL TIPS
FAQ
Troubleshooting Guide
INFORMATION
Glossary
Maintenance
General Specifications
Electrical Specification
Other Specifications
Limited Warranty
English
5
Features
• DTV /TV / CATV
You can use your remote control to select channels which are
broadcast in digital format and conventional analog format. Also,
cable subscribers can access their cable TV channels.
2
3
4
• Information Display (ATSC only)
You can display the title, contents and other information of the
current DTV program on the TV screen.
• Autoprogram
This unit automatically scans and memorizes channels available in
5
6
6
6
6
7
7
your area, eliminating difficult setup procedures.
• Child Lock
This feature allows you to block children’s access to inappropriate
programs.
• Closed Caption Decoder
Built-in closed caption decoder displays text for closed caption
supported programs.
8 • MTS / SAP Tuner
9 Audio can be selected from the remote control.
• Auto Standby
If there is no input signal and no operation for 15 minutes, the
10 unit will go into standby mode automatically.
10 • Sleep Timer
10 You can set the unit to go into standby mode after a specific
11 amount of time.
• Choices for On-screen Language
Select your on-screen language:
12 English, Spanish or French.
12 • Stereo Sound Function
12
13
• PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune
13
13
directly to any channel using the number and decimal point “•”
buttons on the remote control.
14
14
• Various Adjustment for Picture and Sound
Customizes image quality suitable for your room and sets your
sound preference.
16
16
17
18
23
• fun-Link via HDMI Link
(HDMI Cable not Included)
fun-Link allows your other HDMI link devices to be controlled by
the HDMI cable connected to your TV.
• HDMI Input
24 • HDMI-DVI Input
If your video device has DVI output jack, use an HDMI-DVI
conversion cable to connect the unit.
25 • Component Video Input
• PC Input
28
28
• AV Input
• USB Terminal
The JPEG picture files stored on a USB storage device can be
played back on this unit.
30 • Digital Audio Output
30
31
31
31
33
© 2011 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage
medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of
this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify
any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written consent
of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be
construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or
any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
Free Datasheet http://www.datasheet4u.com/
5 Page 
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
Initial Setup
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and autoprogram, which automatically scans and memorizes
viewable channels.
Before you begin:
Make sure the unit is connected to antenna or cable.
1 After making all the necessary connections,
press to turn on the unit.
• It may take a few moments to turn on the unit for the
first time.
• [Initial Setup] menu appears automatically after the
unit is turned on.
2 Use ▲/▼ to select the on-screen language from the
choices (English / Español / Français) on the right side of the
TV screen, then press OK.
3 Use ▲/▼ to select [Antenna] for TV channels or [Cable]
for CATV channels, then press OK.
Initial Setup
Make sure the antenna is connected to ''ANT. IN'' jack.
Select your signal source.
Antenna
Cable
Skip
Antenna
Cable
Or
ANT.IN
Select
OK
Back
Skip
• [Autoprogram] will begin.
Initial Setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
Digital channels
Analog channels
0 ch
0 ch
Skip
English
11
4 Use ◄/► to select the desired location setting, then press
OK.
[Home] is ENERGY STAR® qualified setting.
Initial Setup
Select “Retail” or “Home” for your location.
Retail
Home
Select
OK
• Select [Retail] store, the unit will be set up with
predefined setting for retail displays. In this setting, the
power consumption may possibly exceed the limited
requirement of the ENERGY STAR® qualification.
• Select [Home], the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality according
to your preference. Use this setting to remove the
E-Sticker if visible from the display. ➠ p.23
• When the initial setup is completed, the lowest
memorized channel with the confirmation message of
the location setting will be displayed on the TV screen.
• You must set [Home] in step 4. Otherwise, [Picture]
and [Sound] settings you adjusted will not be
memorized after the unit goes into standby mode.
Note
• If you are not receiving a signal from your cable service, contact
the Cable provider.
• If you press or MENU during autoprogram, this setup of TV
channels will be canceled.
• The initial autoprogram function can be executed for either
[Antenna] or [Cable] only once.When you change the
connection (Antenna / Cable), set [Autoprogram] again. ➠ p.17
• If there is no signal input from the antenna terminal and no
operation for several seconds after you turn on the unit, helpful
hints appears. Follow the instructions listed on the TV screen.
Initial Setup
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the "ANT. IN" jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to the
box and press “SOURCE” key on the remote control to select
the appropriate source input.
Retry
Later
Select
OK Skip
After an initial setup is completed...
• If you want to scan the channels automatically again.
[Autoprogram]
➠ p.17
• You can add the desired cable and analog channels
unmemorized by autoprogram.
[Add Channels]
➠ p.18
• If you want to change to another language.
[Language]
➠ p.23
• If you want to change the location setting.
[Location]
➠ p.23
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet LC320EM2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC320EM2 | LCD TV | Emerson |
| LC320EM2 | SERVICE MANUAL |  Funai Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |