DataSheet.es    


PDF ACPL-333J Data sheet ( Hoja de datos )

Número de pieza ACPL-333J
Descripción 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Fabricantes AVAGO　
Logotipo AVAGO Logotipo



Hay una vista previa y un enlace de descarga de ACPL-333J (archivo pdf) en la parte inferior de esta página.


Total 23 Páginas

No Preview Available ! ACPL-333J Hoja de datos, Descripción, Manual

ACPL-333J
2.5 Amp Output Current IGBT Gate Driver Optocoupler
with Integrated (VCE) Desaturation Detection, UVLO
Fault Status Feedback, Active Miller Clamp and Auto-Fault Reset
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The ACPL-333J is an advanced 2.5 A output current, easy-
to-use, intelligent gate drivers which make IGBT VCE fault
protection compact, affordable, and easy-to implement.
Features such as integrated VCE detection, under voltage
lockout (UVLO), “soft” IGBT turn-off, isolated open
collector fault feedback, active Miller clamping and Auto-
fault reset provide maximum design flexibility and circuit
protection.
The ACPL-333J contains a AlGaAs LED. The LED is optically
coupled to an integrated circuit with a power output
stage. ACPL-333J are ideally suited for driving power IGBTs
and MOSFETs used in motor control inverter applications.
The voltage and current supplied by these optocouplers
make them ideally suited for directly driving IGBTs with
ratings up to 1200 V and 150 A. For IGBTs with higher
ratings, the ACPL-333J can be used to drive a discrete
power stage which drives the IGBT gate. The ACPL-333J
have an insulation voltage of VIORM = 1230 VPEAK.
Block Diagram
6, 7
ANODE
5, 8
CATHODE
LED1
D
R
I
V
E
R
SHIELD
UVLO
DESAT
13
VCC2
11
VOUT
DESAT
14
9, 12
VEE
• 2.5 A maximum peak output current
• 2.0 A minimum peak output current
• 250 ns maximum propagation delay over temperature
range
• 1.7A Active Miller Clamp.Clamp pin short to VEE if not
used
• Desaturation Detection
• Under Voltage Lock-Out Protection (UVLO) with
Hysteresis
• Open Collector Isolated fault feedback
• “Soft” IGBT Turn-off
• Automatic Fault Reset after fixed mute time , typical
26μs
• Available in SO-16 package
• 100 ns maximum pulse width distortion (PWD)
• 50 kV/μs minimum common mode rejection (CMR) at
VCM = 1500 V
• ICC(max) < 5 mA maximum supply current
• Wide VCC operating range: 15 V to 30 V over
temperature range
• Wide operating temperature range: –40°C to 105°C
• Safety approvals: UL approval, 5000 VRMS for 1 minute,
CSA approval, IEC/EN/DIN-EN 60747-5-5 approval
VIORM = 1230 VPEAK
VCC1
FAULT
2
3
LED2
1, 4
VS
SHIELD
VCLAMP
10
VCLAMP
VE
16
15
VLED
Applications
• Isolated IGBT/Power MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters and Uninterruptible Power Supply
(UPS)
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Free Datasheet http://www.datasheet4u.com/

1 page




ACPL-333J pdf
Table 2. Insulation and Safety Related Specifications
Parameter
Symbol ACPL-333J Units
Minimum External Air L(101)
Gap (Clearance)
8.3
mm
Minimum External
Tracking (Creepage)
Minimum Internal
Plastic Gap (Internal
Clearance)
Tracking Resistance
(Comparative Tracking
Index)
Isolation Group
L(102)
CTI
8.3
0.5
>175
IIIa
mm
mm
V
Conditions
Measured from input terminals to output terminals, shortest
distance through air.
Measured from input terminals to output terminals, shortest
distance path along body.
Through insulation distance conductor to conductor, usually the
straight line distance thickness between the emitter and detector.
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table 1)
Table 3. Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Output IC Junction Temperature
Average Input Current
Peak Transient Input Current,
(<1 μs pulse width, 300pps)
Reverse Input Voltage
“High” Peak Output Current
“Low” Peak Output Current
Positive Input Supply Voltage
FAULT Output Current
FAULT Pin Voltage
Total Output Supply Voltage
Negative Output Supply Voltage
Positive Output Supply Voltage
Gate Drive Output Voltage
Peak Clamping Sinking Current
Miller Clamping Pin Voltage
DESAT Voltage
Output IC Power Dissipation
Input IC Power Dissipation
Solder Reflow Temperature Profile
Symbol
TS
TA
TJ
IF(AVG)
IF(TRAN)
Min.
-55
-40
Max.
125
105
125
25
1.0
VR 5
IOH(PEAK)
2.5
IOL(PEAK)
2.5
VCC1
-0.5 7.0
IFAULT
8.0
VFAULT
-0.5
VCC1
(VCC2 - VEE)
-0.5
33
(VE - VEE)
-0.5
15
(VCC2 - VE)
-0.5
33 - (VE - VEE)
VO(PEAK)
-0.5
VCC2
IClamp
1.7
VClamp
-0.5
VCC2
VDESAT
VE
VE + 10
PO 600
PI 150
See Package Outline Drawings section
Units
°C
°C
°C
mA
A
V
A
A
V
mA
V
V
V
V
V
A
V
V
mW
mW
Note
2
2
1
3
3
6
2
2
Table 4. Recommended Operating Conditions
Parameter
Operating Temperature
Total Output Supply Voltage
Negative Output Supply Voltage
Positive Output Supply Voltage
Input Current (ON)
Input Voltage (OFF)
Symbol
TA
(VCC2 - VEE)
(VE - VEE)
(VCC2 - VE)
IF(ON)
VF(OFF)
Min.
- 40
15
0
15
8
- 3.6
Max.
105
30
15
30 - (VE - VEE)
12
0.8
Units
°C
V
V
V
mA
V
Note
2
7
4
5
Free Datasheet http://www.datasheet4u.com/

5 Page





ACPL-333J arduino
7.5 300
t PLH
t PHL
250
7.0
200
6.5
150
6.0
-40
-20
0 20 40 60
TA - TEMPERATURE - qC
Figure 12. DESAT threshold vs. temperature
80 105
300
t PLH
t PHL
250
100
-40
-20
0 20 40 60
TA - TEMPERATURE - qC
Figure 13. Propagation delay vs. temperature
80 105
300
t PLH
t PHL
250
200 200
150 150
100
15
20 25
Vcc - SUPPLY VOLTAGE - V
Figure 14. Propagation delay vs. supply voltage
100
30 0 10 20 30 40 50
LOAD RESISTANCE - ohm
Figure 15. Propagation delay vs. load resistance
300
t PLH
t PHL
200
100
0
0 10 20 30
LOAD CAPACITANCE - nF
Figure 16. Propagation delay vs. load capacitance
40
50
11
Free Datasheet http://www.datasheet4u.com/

11 Page







PáginasTotal 23 Páginas
PDF Descargar[ Datasheet ACPL-333J.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ACPL-333J2.5 Amp Output Current IGBT Gate Driver OptocouplerAVAGO
AVAGO

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar