DataSheet.es    


PDF RN55C10R0BBSL88 Data sheet ( Hoja de datos )

Número de pieza RN55C10R0BBSL88
Descripción Metal Film Resistors
Fabricantes Vishay 
Logotipo Vishay Logotipo



Hay una vista previa y un enlace de descarga de RN55C10R0BBSL88 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! RN55C10R0BBSL88 Hoja de datos, Descripción, Manual

www.vishay.com
CMF (Military RN and RL)
Vishay Dale
Metal Film Resistors, Military, MIL-R-10509 Qualified,
Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
FEATURES
• Very low noise (- 40 dB)
• Very low voltage coefficient (5 ppm/V)
• Controlled temperature coefficient
• Flame retardant epoxy coating
• Commercial alternatives to military styles are available
with higher power ratings. See CMF Industrial data sheet:
(www.vishay.com/doc?31018)
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RESISTANCE RESISTANCE
GLOBALMIL
MODEL STYLE
MIL
SPEC.
SHEET
POWER
RATING
P70 °C
W
POWER
RATING
P125 °C
W
MAX.
WORKING
VOLTAGE (1)
V
RANGE
MIL-R-10509
± 100 ppm/°C
RANGE
MIL-R-10509
± 50 ppm/°C
RANGE
MIL-R-10509
± 25 ppm/°C
RESISTANCE
RANGE
MIL-PRF-22684
(D) (C) (E)
TOL. (3)
±%
DIELECTRIC
STRENGTH
VAC
CMF50 RN50 08
- 0.05
200
- 10 to 100K 10 to 100K
-
0.1, 0.25,
0.5, 1
450
CMF55 RN55 07 0.125 0.10 200 10 to 301K 49.9 to 100K 49.9 to 100K
-
0.1, 0.25,
0.5, 1
450
CMF60 RN60 01 0.25 0.125
300
10 to 1M 49.9 to 499K 49.9 to 499K
-
0.1, 0.25,
0.5, 1
500
CMF65 RN65 02 0.50 0.25
350
10 to 2M 49.9 to 1M 49.9 to 1M
-
0.1, 0.25,
0.5, 1
900
CMF70 RN70 03 0.75 (2) 0.50
500 10 to 2.49M 24.9 to 1M 24.9 to 1M
-
0.1, 0.25,
0.5, 1
900
CMF07 RL07 01 0.25
-
250
-
-
-
51 to 150K
2, 5
450
CMF20 RL20 02 0.50
-
350
-
-
-
4.3 to 470K
2, 5
700
Notes
(1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less.
(2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D.
(3) Tolerances of ± 0.1 %, ± 0.25 % and ± 0.5 % are not applicable to characteristic D.
TECHNICAL SPECIFICATIONS
PARAMETER
Voltage Coefficient
Insulation Resistance
Operating Temperature Range
Terminal Strength
Solderability
UNIT
ppm/V
°C
Ib
CONDITION
5 when measured between 10 % and full rated voltage
1010 min. dry; 108 min. after moisture test
- 65/+ 175 (see derating curves for military range)
5 pound pull test for RL07/RL20; 2 pound pull test for all others
Continuous satisfactory coverage when tested in accordance
with MIL-R-10509 and MIL-PRF-22684
Revision: 02-May-13
1 Document Number: 31027
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Free Datasheet http://www.datasheet4u.com/

1 page




RN55C10R0BBSL88 pdf
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000
Free Datasheet http://www.datasheet4u.com/

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet RN55C10R0BBSL88.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
RN55C10R0BBSL88Metal Film ResistorsVishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar