DataSheet.es    


PDF DB2J20600L Data sheet ( Hoja de datos )

Número de pieza DB2J20600L
Descripción Silicon epitaxial planar type
Fabricantes Panasonic 
Logotipo Panasonic Logotipo



Hay una vista previa y un enlace de descarga de DB2J20600L (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! DB2J20600L Hoja de datos, Descripción, Manual

DReovcisNioon. . T2 T4-EA-13097
DB2J20600L
Silicon epitaxial planar type
For high frequency rectification
DB2X206 in SMini2 type package
Features
Low forward voltage VF
Small reverse leakage current
Halogen-free / RoHS compliant
(EU RoHS / UL-94 V-0 / MSL:Level 1 compliant)
Marking Symbol: D3
Packaging
Embossed type (Thermo-compression sealing) : 3 000 pcs / reel (standard)
Absolute Maximum Ratings Ta = 25 C
Parameter
Symbol
Rating
Reverse voltage
VR 20
Repetitive peak reverse voltage
VRRM
20
Forward current (Average) *1
Non-repetitive peak forward surge current *2
Junction temperature *1
Operating ambient temperature
IF(AV)
IFSM
Tj
Topr
1
2
150
-40 to +85
Storage temperature
Tstg -55 to +150
Note: *1 Tl = 80 °C
*2 50 Hz sine wave 1 cycle (Non-repetitive peak current)
Unit
V
V
A
A
°C
°C
°C
Product Standards
Schottky Barrier Diode
DB2J20600L
1.25
0.35
2
Unit: mm
0.13
1
0.5
0.7
1. Cathode
2. Anode
Panasonic
JEITA
Code
SMini2-F5-B
SC-90A
Internal Connection
2
1
Established : 2011-06-14
Revised : 2013-04-20
Page 1 of 4
Free Datasheet http://www.datasheet4u.com/

1 page




DB2J20600L pdf
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
Free Datasheet http://www.datasheet4u.com/

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet DB2J20600L.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DB2J20600LSilicon epitaxial planar typePanasonic
Panasonic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar