|
|
PDF SCA3000 Data sheet ( Hoja de datos )
| Número de pieza | SCA3000 | |
| Descripción | 3-axis accelerometer | |
| Fabricantes | VTI technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SCA3000 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
SCA3000 Assembly Instructions
SCA3000 Series
3-axis accelerometer
Free Datasheet http://www.datasheet4u.com/
1 page  
SCA3000 Assembly Instructions
3 SCA3000 Package Outline and Dimensions
The outline and dimensions for the SCA3000 MID package are presented in figure 4.
7.00
0.55 (18x)
0.43 (18x)
0.80
8 x 0.80 = 6.40
0.10
1.80
Figure 4. Outline and dimensions of the SCA3000 component.
VTI Technologies Oy
www.vti.fi
Subject to changes
TN54
5/15
Rev.C
Free Datasheet http://www.datasheet4u.com/
5 Page 
SCA3000 Assembly Instructions
Figure 9. Solder pads, component leads and the solder joints are located under the component
itself.
X-ray inspection is a recommended inspection method for being able to check the complete solder
joint area for solder bridges or short-circuits between solder pads. The X-ray inspection systems
vary from manual to fully automated optical inspection systems. X-ray can be used for sample
based process control, but it can also be implemented as an automatic in-line control. X-ray
inspection can also be used to establish and optimize the component assembly process
parameters.
Cross-sectional analysis is also an approved method to inspect how well solder has wetted the
pads of component. Cross-sectional analysis is not used for production inspection, but if required, it
can be used to establish and optimize the component assembly process parameters. Cross-
sectioning is a destructive inspection method. An example of a SCA3000 solder joint cross-section
in presented in figure 10.
Outer
surface of
solder pad
Inner surface
of solder pad
Figure 10. Wetting of solder is different on the inner and outer surface of the solder pad.
VTI Technologies Oy
www.vti.fi
Subject to changes
TN54
11/15
Rev.C
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet SCA3000.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SCA3000 | 3-axis accelerometer | VTI technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |