|
|
PDF 2SA1787 Data sheet ( Hoja de datos )
| Número de pieza | 2SA1787 | |
| Descripción | PNP/NPN Epitaxial Planar Silicon Transistors | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 2SA1787 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number:EN3581
PNP/NPN Epitaxial Planar Silicon Transistors
2SA1787/2SC4650
High-Definition CRT Display
Video Output Applications
Features
· High breakdown voltage : VCEO≥200V.
· Small reverse transfer capacitance and excellent high
frequency characteristic:
Cre=1.2pF (NPN), 1.7pF (PNP).
· Adoption of FBET processes.
Package Dimensions
unit:mm
2064
[2SA1787/2SC4650]
( ) : 2SA1786
E : Emitter
C : Collector
B : Base
Specifications
SANYO : NMP
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Colletor Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Symbol
Conditions
ICBO
IEBO
hFE
fT
Cob
VCB=(–)150V, IE=0
VEB=(–)4V, IC=0
VCE=(–)10V, IC=(–)10mA
VCE=(–)30V, IC=(–)10mA
VCB=(–)30V, f=1MHz
Reverse Transfer Capacitance
Cre VCB=(–)30V, f=1MHz
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
VCE(sat) IC=(–)20mA, IB=(–)2mA
VBE(sat) IC=(–)20mA, IB=(–)2mA
Ratings
(–)200
(–)200
(–)5
(–)100
(–)200
1.0
150
–55 to +150
Unit
V
V
V
mA
mA
W
˚C
˚C
Ratings
min typ
60
150
(2.6)
1.7
(1.7)
1.2
max
(–)0.1
(–)0.1
320
(–)0.6
(–)1.0
Unit
µA
µA
MHz
pF
pF
pF
pF
V
V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
83198HA (KT)/5180TA (KOTO) No.3581–1/5
1 page  
2SA1787/2SC4650
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of August, 1998. Specifications and information herein are subject to
change without notice.
PS No.3581–5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet 2SA1787.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 2SA1780 | TRANSISTORS TO 92L TO-92LS MRT |  ROHM Semiconductor |
| 2SA1781 | PNP / NPN Transistor | Sanyo Semicon Device |
| 2SA1783 | PNP / NPN EPITAXIAL PLANAR SILICON TRANSISTORS | Sanyo Semicon Device |
| 2SA1784 | PNP Epitaxial Planar Silicon Transistor | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |