|
|
PDF 2SA1162 Data sheet ( Hoja de datos )
| Número de pieza | 2SA1162 | |
| Descripción | Silicon PNP Epitaxial Type Transistor | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 2SA1162 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
2SA1162
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)
2SA1162
Audio Frequency General Purpose Amplifier Applications
• High voltage and high current: VCEO = −50 V, IC = −150 mA (max)
• Excellent hFE linearity: hFE (IC = −0.1 mA)/hFE (IC = −2 mA)
= 0.95 (typ.)
• High hFE: hFE = 70~400
• Low noise: NF = 1dB (typ.), 10dB (max)
• Complementary to 2SC2712
• Small package
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO −50 V
Collector-emitter voltage
VCEO −50 V
Emitter-base voltage
VEBO −5 V
Collector current
IC
−150
mA
Base current
IB −30 mA
Collector power dissipation
PC 150 mW
Junction temperature
Storage temperature range
Tj 125 °C
Tstg
−55~125
°C
JEDEC
JEITA
TO-236MOD
SC-59
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
TOSHIBA
2-3F1A
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
Weight: 0.012 g (typ.)
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Collector cut-off current
Emitter cut-off current
DC current gain
Collector-emitter saturation voltage
Transition frequency
Collector output capacitance
Noise figure
Symbol
Test Condition
ICBO
IEBO
VCB = −50 V, IE = 0
VEB = −5 V, IC = 0
hFE
(Note)
VCE = −6 V, IC = −2 mA
VCE (sat) IC = −100 mA, IB = −10 mA
fT VCE = −10 V, IC = −1 mA
Cob VCB = −10 V, IE = 0, f = 1 MHz
NF
VCE = −6 V, IC = −0.1 mA, f = 1 kHz,
Rg = 10 kΩ,
Min Typ. Max Unit
⎯ ⎯ −0.1 μA
⎯ ⎯ −0.1 μA
70 ⎯ 400
⎯ −0.1 −0.3 V
80 ⎯ ⎯ MHz
⎯4
7 pF
⎯ 1.0 10 dB
Note: hFE classification O (O): 70~140, Y (Y): 120~240, GR (G): 200~400, ( ) marking symbol
Marking
1 2007-11-01
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet 2SA1162.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 2SA1160 | Silicon PNP Epitaxial Type Transistor | Toshiba Semiconductor |
| 2SA1160 | Plastic-Encapsulated Transistors |  TRANSYS Electronics Limited |
| 2SA1162 | Silicon PNP Epitaxial Type Transistor | Toshiba Semiconductor |
| 2SA1162 | PNP Transistor |  HOTTECH |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |